The base of the game (see. Fig.) - plywood 1160x580x20 mm in size. Side walls with a height of 160 mm are also made from it. Holes are drilled in the walls through which the rods will be passed, "controlling" the players. The structure is fastened with glue and screws, and the corners are reinforced with metal squares. To prevent the ball from lingering in the corners, glue triangular blocks into them.

Make the rods for the game, to which the figures of athletes are attached, from a thin metal tube Ø 10 mm. The handles for them can be made of wood or plastic tubes with an internal Ø 10 mm can be used.

Holes in the side walls for the rods are made according to their outer diameter. A support is attached to the opposite wall for each rod: a flange with a soldered tube into which the rod will be inserted.

A - playing field; B - control rod with support: 1 - support, 2 - metal plate, 3 - tube, 4 - pin, 5 - plastic sleeve. 6 - felt ring, 7 - limiter ring; B - placement of players: 1 - goalkeeper line, 2 - defenders, 3 - midfielders, 4 - forwards. X is the distance of the longitudinal movement of the rod.

Each rod has a restrictive plastic ring; the distance between him and the wall will determine the lateral movement of this row of players.

Make figures of football players from plywood 5 mm thick and attach them to the rods with M3 bolts.

In one foreign blog, my son and I saw the idea of ​​​​making table football.

Since my son is still 3 and a half years old, I would not like to spend money on a large table football, we decided to make this toy with our own hands.

Crafts for children with their own hands - it turned out to be as easy as shelling pears) So, what did we need:

The tubules are long and thick;

shoe box;

Packing of multi-colored clothespins;

Multi-colored adhesive tape;

Wooden skewers;

Scissors.

A few comments on some accessories.

1. Tubes. We bought thick tubes at the expense of the gap in clothespins, but if the gap in the clothespin is small, then thin tubes are also possible.

The tubes must be long.

2. Multi-colored clothespins. We wanted to buy wooden clothespins and decorate them with decorative tape, but they were not in the store, so plastic ones came up.

3. Wooden skewers. Wooden skewers are needed to seal the straws, but if you can find smooth wooden sticks instead of straws, it will be generally great. We didn't find it in the supermarket.

4. Shoe box. We have a box of children's shoes, so it turned out to be quite a mini-football. Based on my experience, it would be better to take a box from adult shoes, it is more authentic and there will be more playing field.

5. Multi-colored tape. This is a simple miracle. The son was happy to decorate the box (he chose the design himself, so we got such a football field). We took Fashion Angels scotch. You can also decorate with colored paper. I forgot the glue at work, so everything that is not done is all for the better. Then Danya decorated not only football with scotch tape, but also his toy boxes, a table and even wanted to decorate my mobile.

My son and I had a wonderful time. This lesson took only half an hour of time and of course you can imagine how much delight the child has from the fact that he and his mother made football.

And here are our emotions after playing football :)

P.S. Videos and photos were taken on a mobile phone - we apologize for the quality.

Crafts with children are always exciting and fun :)

pros

• - saving money on the purchase of table football
  - smile and joy on the face of the child
  - an additional opportunity to have fun with the kids

Elena Semenova

Football field is very easy. You need cardboard, white paper, scissors, a pencil, a ruler, glue and tape.

Still need a big one box.

We make gates from small boxes and nets.

Making markup

Cover with white stripes.

We fit football box with adhesive tape for strength and smoothness.

Here is such a beauty.

And here's how you can use:

1. Finger football.

You can play from 4 to 6 players: 2 goalkeepers, others football players. Can only be played with the index and middle fingers (like two legs football player) . The ball can be taken rubber. The motor skills of the hand and fingers are developing well.

Boys and girls enjoyed playing with their fingers and scoring goals.

2. Breathable football.

You can play from 2 to 4 players. Make a ball out of paper (maybe papier-mâché). With the help of breathing from the middle of the field, blow the ball into the goal. Who is more for a while or up to a certain amount.

3. Puppet football.

Play in teams too. The players make small toys. Also can be made from natural material, from plasticine, from clay players football team.

I wish you all success in your work!

Related publications:

Consultation for educators "The game will teach us, the game will make us friends" There are a lot of role-playing games in our group: "Hairdresser's", "Shop", "Hospital", "Pharmacy", Library, "Post Office" and others. Children look forward to it.

Physical culture project "Football in kindergarten". senior preparatory group Type of project: physical culture Participants: pupils of the senior group, educator, instructor in physical education, teacher of additional education.

Play as a children's activity, play as an educational form - is it the same thing? Consultation for educators 1. Play as a children's activity - is play as an educational form the same thing? A game is a kind of activity in the conditions of situations directed.

Synopsis of the football lesson "Don't waste time, but play football" Under the march, the children of two teams go around the football field, greet each other, line up in one line (the ball is in the hands of the children) Physical instructor.

The game "Wadded football" is used as a breathing exercise, to develop the ability to control the direction of the air stream. For.

Respiratory gymnastics has become an integral part of physical culture and health work in preschool educational institutions. It is very beneficial for health.

I want to talk about the idea of ​​​​creating a soccer game for girls. Having visited the courses, the teacher showed us several games that can be done.

Hello, there have been no new entries for a long time, so catch it. Another part about creating a gaming table. This time we will talk about the playing field. In fact, our table is almost ready, there is very little left, stay tuned =)

Required drawings
The playing field is made from 29mm MDF sheet. Both sides of the workpiece need to be reinforced, so we glue HPL sheets on both sides. This is done to avoid warping of the material later.

First, blanks for the playing field are cut out from MDF and HPL. The dimensions of the field should be approximately 121x70 cm. As you can see, it is allowed to make a small error in the drawing. Be careful, the following explains why this is needed.

Using a notched trowel, we evenly spread a layer of glue on the surface of the MDF and the inside of the HPL. It should take about 15 minutes to dry, after which the top layer of glue will appear dried.

MDF with adhesive applied.

When the glue dries a little, we put an HPL blank on the MDF. We do this carefully, as it will be difficult to fix a bad overlay. Next, we roll the entire surface of the HPL with a roller to secure the connection, as well as to drive out residual air.

After the field is covered with HPL on both sides, we proceed to polishing the surface of one of the sides. This must be done with a grinder with fine sandpaper. Do not apply excessive force, otherwise you can wipe the coating through.

The coating will be ready as soon as it becomes evenly matte.

Then we proceed to lay out the defensive and midfield areas. For convenience, you can use a stencil or masking film. It is preferable to use a masking film, since paint can flow under the stencil and become ugly stains.

After all the lines are outlined, you can remove the masking film. To cut a circle, you can use a compass with a sharp knife or scalpel at the end.

(Picture can be enlarged)
In this photo you can see part of the removed masking film.

Then, all unprotected parts of the playing field are covered with paper. Check that there are no gaps anywhere.

We cover the necessary places with white paint. You can use regular spray. The paint is applied in several thin layers so that there are no smudges and bubbles. Let the paint dry before removing the film.

(Picture can be enlarged)
This is what we get after removing the film and paper.

After the paint is completely dry, we use a circular saw to make 45 degree cuts from the underside of the playing field near the corners. The depth of the cut should be chosen in such a way that 3-6 mm remain until the end.

In these cuts, we insert auxiliary rails with a thickness equal to the saw blade.

With the help of glue, the slats are attached to the grooves. For better fixing, lightly tap them with a hammer.

Now that the playing field is ready, you can bring it to the dimensions indicated on the drawing: 119.5x69cm.

In order to be sure that the ball will roll off the edges of the field, we made another cut along each of the two sides. For this, the tool that was described in the last part was used. The cutting depth is about 2.5-3 cm, the distance from the surface is 3-5 mm.

(Picture can be enlarged)
We insert the slats smeared with glue into the cuts, as in the previous steps.

Thus, we see that the edges are slightly raised relative to the rest of the field, thereby preventing the ball from stopping at the walls of the field. On my own behalf, I want to note that not all tables have this kind of elevation, so I think you can only get by with cuts in the corners.

Now we insert the playing field into the "body" of our future table. Through the holes in the side walls of the table, we pass pencils in order to keep our field. This is done in order to mark places on the bottom of the field for drilling holes for special screws. Later we will attach special holder rails to the side walls on which the playing field will be held.

(Picture can be enlarged)
In the marked places, we make holes 20 mm deep for special screws, as in the photo above. The groove for the screw can be made with a hacksaw.

The final view of the playing field.

Football do-it-yourself "Making a board game Football"

Teacher Kozhina Tatyana Nikolaevna

Relevance : From early childhood, the ball was and remains the favorite and one of the first toys and amusements for the child.Football - a sports game with a ball, one of the most popular games in our country and the world. Children love to playfootball .

Problem : Not always children can playfootball on the street . Children's toy stores sell board games« Football » which are expensive and not everyone can buy it. So I decided to try making a board gamedo it yourself from improvised materials.

Target : create a board game "Football " .

Tasks of the master class:
1. To present pedagogical experience in the use of modern pedagogical technologies in the education of preschool children.
2. Motivate teachers to use methods, techniques, game tasks in their practice.
Hypothesis : I assumed that if you make a board game yourself« Football » , then it is interesting and you can play at any time of the year.

Methods research : Conversations about the history of occurrencefootball , reading information, drawing, viewing photos.

Main part : In 2018, our country will host the Worldfootball, including . Rostov-on-Don. Children love to playfootball but you can't play this game in winter. I decided to make a minifootball to play with children in a group. I suggest making a minifootball from waste material. At home with their parents, the children watchedfootball on tv , and we discussed this game with the children. The children drew pictures aboutfootball , we read a fairy tale about the ball, guessed riddles, looked at pictures with the imagefootball field how it looks.

Dear colleagues, I present to your attention a didacticboard game " Football ", which I recommend to make together with children.A game consists of a large playing field with marks.A game designed for children of middle and older preschool age. At the same time canplay a subgroup of children .

Master Class

For the manufacture of desktopfootball we took : a box, scissors, glue, colored paper, wooden skewers, colored pencils and felt-tip pens. We cut the box and glued it with colored paper, marked the field, made the gate and installed it. Draw two teams on cardboardfootball players , glued the figures together and put them on skewers. Holes were made on the sides of the box and skewers were inserted there so that they could move freely. We made different balls from foil, paper and adhesive tape, foam rubber. Our minifootball ready .

I offer you several options for the game.

For example : put awayfootball players and replace them with fingers turned fingerfootball , put the ball from cotton wool in the center of the field and blow it into the goal, it turns out to be breathablefootball , can replace cardboardfootball players on figurines from Kinder Surprise.

Well, now a little about the benefits of thisgames : after all, past such an important development of fine motor skills, with the help of it you can achieve many other goals. For the game, you can use figures from kinder surprises, the players are attached on a magnetic basis and the soccer ball is also a painted magnet, so now my children have experimentally found out that magnets can not only attract, but also repel each other.

Players of different teams differ in the color of the form, so in the process you can fix the name of the colors.

Our “football players” have a number on the jerseys, so repeating the score will also not be difficult.

Since our football players are animals, it is possible to repeat wild and domestic animals. Of course, with the help of this game, you can expand the horizons of children and replenish their vocabulary, and most importantly, make them want to play sports and, of course, positive emotions.

And we in the senior group arranged a match between boys and girls, the children really liked it, it was fun.

Conclusion : I came to the conclusion that the game was madeDIY is interesting , informative, and you can also play at any time of the year.

Thank you for attention!