Volumetric flowers perfectly decorate the room, if they are. Placing on the wall - they will give an unusual accent to the celebration and will be remembered for a long time.

Each has its own personality - a gentle slope of the stem or beautiful color transitions of petals, and all this adds joy to our life.

The proposed do-it-yourself flower models will suit any holiday.

Volumetric paper flowers on the wall by templates

Master class with photos of all stages of creating a flower

1. We need thick designer paper in two colors: red and white. Paper size 102 x 70 cm. You will also need a metal ruler along which you will have to work with a breadboard knife. And, as usual, scissors and a glue gun.

2. Take a petal template drawn on paper with a petal length of 15 cm and a width of 16.5 cm. The horizontal stripe at the bottom of the petal measures 7.5 cm.

3. Cut out the template carefully with scissors.

4. Along the borders, the template is cut without much difficulty.

5. Put the cut out template on a red sheet of paper and cut a strip according to its width (a little with a margin).

6. Then put the petal template on the strip in height and cut off the square. Place the cut square on top of the strip and cut the required number of squares.

7. Place the template on top of all the squares collected in a pile and secure it with a clothespin.

8. Easy to cut 5 red petals at once. The first row will require 7-8 petals and they have already been cut.

9. Measure the width of the second strip according to the template and cut it off. One strip for the petals of the 1st row will not be enough.

10. Cut out a red circle with a diameter of 14 cm from one of the squares. This will be the center of the flower. Place the circle on the table and try on two opposite petals. The petals go over the circle within 1 cm. Mark this size on the circle for gluing with glue.

11. The flower should be about 40 cm in diameter.

12. And now you need to cut each petal of the first row in half to the center, as in the photo.

13. And now, with the help of a glue gun, we will create the volume of each petal.

14. Take a glue gun and apply a thin strip of glue along the length of the cut and glue the cut pieces together, making an overlap. Thus, we give a volumetric shape to all the petals of the first row.

We form volumetric flowers for the petals of the 1st row

15. Take a glue gun and apply glue to the back of the bottom of the volumetric petal. Press the part of the petal smeared with glue to the circle, as in the photo.

16. Repeat all the same steps with the second petal and glue it to the circle with an overlap on the first petal.

17. We continue to glue and collect the volumetric petals of the first row.

18. The first row of paper flower petals is ready.

Assembling the petals of the 2nd row

19. Draw on paper a petal template for the 2nd row. Its dimensions are 13 cm high, 14 cm wide and at the base the horizontal width is 6 cm.

20. Now we perform all similar actions when forming the 1st row: we put the template of the petal of the 2nd row on a sheet of paper, cut off a strip of the desired width, put the template on the strip and cut the squares.

21. Fasten the template to the pile of squares with a paper clip and cut out the petals for the 2nd row.

22. Cut the petals of the 2nd row in half to the center, apply glue lengthwise to the edge of the cut and overlap. The volumetric petals of the 2nd row are ready. We glue each petal into the central circle of the flower with overlap.

23. The second circle of petals is glued.

Assembling the petals of the 3rd row

24. Draw on a piece of paper a petal template for the third row with the following dimensions: petal height 11 cm, width 12.5 cm with a base length of 6 cm.

25. Cut out the petals for the 3rd row and glue them to the central circle, performing all the same actions when creating the 1st and 2nd rows. Row 3 is ready and it consists of 5 petals.

Formation of the middle of the flower (stamens)

26. Bulky flowers with a center look more original. We measure 16 cm on a sheet of white paper.We will say in advance that the height of the stamens is intended to be 8 cm in size.

27. Cut off a strip of white paper 16 cm wide.

29. In order not to injure the table, put a sheet of thick paper, put a white strip on it and use an iron ruler and a breadboard knife to cut the strips without reaching 7-8 mm from both edges of the strip. The thinner you cut the strips, the more delicate the middle will be. A maximum of 0.5 cm is allowed.

30. On a strip of red, we also cut very narrow strips. Can be cut with a sharp clerical knife.

31. The paper is double-sided and therefore we glue both cut strips along the edge on one side.

33. And glue the second edge of both strips together, it will be a little more difficult because of the different widths.

34. This is how the glued cut strips will look from the side.

35. Spread glue from a pistol and press the edges of the strips tightly.

36. Once again, grease the edges of the glued strips with glue and press them together again, as in the photo.

37. It will be a little difficult, but you should deal with these without any problems.

38. Then, like this, we will twist the middle of the flower with white and red stamens, periodically applying drops of glue. It is very important that the base of the flower is flat.

39. Before gluing the middle, you need to think about how the flower will be attached to the wall: using double-sided tape or wire loops.

40. We pierce the floristic wire (or another) not in the middle of the flower, where it is thin, but where the petals are glued, right through them in two opposite places of the circle, pull it slightly and drip glue into the holes with the wire.

41. Apply glue to the lower part of the center with stamens.

42. And press with palms in the central circle of the flower.

43. The middle is glued. The flower turned out to be large and voluminous.

You have learned how to create volumetric flowers with your own hands using templates.

How to make voluminous flowers out of paper with your own hands - video

There is always a space between large flowers, which can be filled with smaller flowers and of a different color. In this video, voluminous flowers are made white and also original.

Smaller flowers dilute the wall decor and make it more attractive.

Large paper flowers - master class

Now we will learn how to make large decorative tropical flowers that can be used to decorate the wall and in an original way transform the house for a party.

Instructions for creating large flowers

1. We create petal patterns with our own hands. First, let's draw large petals for the first row of the flower.

3. Cut out the drawn template.

4. Put the template on a sheet of yellow paper and draw 5-6 petals according to the template with a pencil.

5. Make a small cut at the base of the petal.

6. Bend the upper part of the petal, giving volume, and overlap the cut as in the photo.

7. Volumetric petals are ready.

8. Glue the petals together at the bottom with an overlap.

9. Approximately as in the photo.

10. The first row of petals is glued together.

11. For the second row, make the petals a little smaller.

12. Glue the second row of smaller petals with an overlap. Place the fragments of the petals so that they cover the connections of the petals of the first row.

13. For the third row, draw a petal pattern that is even smaller than the previous one and repeat all the previous steps.

14. Make the central part of the flower. We bend the rectangular sheet in half and cuts from the side of the fold.

15. Unbend the sheet and bend it in the other direction, glue the edges.

16. The edges must be glued evenly.

17. Twist into a tube, gluing along the way.

18. Glue the bottom of the tube with glue.

19. Press the tube with the stamens to the center of the flower and fix it with glue.

20. These beautiful paper flowers can be made in any color, according to your imagination.

Volumetric flowers of large sizes are made simply and easily.

Video on how to easily and easily make a large paper flower

Volumetric flowers on the walls of the festively decorated hall cheer up and inspire approval.

If you make a paper flower with your own hands, then such a masterpiece will delight the eye for many years. Paper bouquets are similar to real inflorescences, captivating people with the beauty of their shapes, graceful lines and unique images of leaves and buds.

Creativity from paper improves the imagination and sense of artistic style, does not require any special materials and devices for work.

To create paper crafts you will need:

As additional means, you may need: wire, awl, straws for drinks or empty ampoules - to create stems; various beads, buttons, beads - for decorating buds. Various paints will be used to paint the compositions. In some cases, a hole punch, colored ribbons, pieces of fabric and cardboard are useful.

Recently, special kits for making artificial flowers have appeared in stores, which have basic components and step-by-step instructions with illustrations.

Origami flowers

You can create a paper flower with your own hands in the origami style, which consists only in folding various configurations. To make crafts using this technique, you will need multi-colored double-sided paper, a glue and scissors.

To make the simplest model, you need to follow these steps:

• prepare a square piece of colored paper;
• bend it diagonally on both sides until smooth edges are formed, as well as make straight folds that will result from folding the square in half;
• bend one of the resulting vertices towards the center;
• perform the same actions with the three remaining corners;
• make folds on all folded triangles. To get them, you need to fold it, first forming a triangle from one edge, then smoothing it, we form a fold from the other edge;
• turn the product on the other side;
• bend the corners and the formed square;
• unfold the workpiece again;
• on the folds made earlier, which are on all triangles bent to the center, certain actions must be done. Run folds in the middle of the figures, and smooth their edges;
• do the same with the remaining triangles;
• wrap the corners and turn the future flower over again;
• all corners are like flower petals. Straighten them;
• turn again to the opposite side and bend the corners from the center. These are the petals of the future masterpiece;
• bend diagonally, carefully stretching these leaves;
• in the resulting flower, you need to slightly sharpen the ends of the outer leaves, squeezing them with your fingers.

You can make such a creation from any color you like.

Flowers from colored paper

Even kids can make artificial flowering plants from plain colored paper easily and simply. There are many different ways, but it is worth paying attention to such simple techniques.

1st option:

2nd option:

Spiral paper gifts of flora can be used to decorate postcards made with your own hands or decorate gift wrappers.

To make such paper flowers, you must adhere to the sequence:

• The first step is to create a bud template. To do this, try to depict a spiral on a piece of paper of any color and cut the blank exactly along the lines.
• Gently twist the entire resulting paper spiral, starting from the end point.
• We form the stem and leaves from green paper.
• Before you start connecting the individual parts of the creation, gently straighten the spiral - this way you will help the flower to open.

Corrugated paper flowers

To learn how to make hand-made flowers from corrugation, you need:

• trim the stem base to the desired length. Cover one edge with glue and wrap it with a narrow strip of yellow crepe paper. The core will turn out;
• take the original sheet of material of the desired color (red, burgundy), fold it 12 p. and cut petals out of it. From the parts obtained, we form a bud: attach each piece to the stem with glue, lubricating the lower part with it. From time to time, you can make the bud thickening by rewinding the leaves with yellow paper;
• when all the details form a single whole, wrap them with a green strip of crepe, while intertwining the stem at once.

In addition to this method, there are others, any of which is suitable for the manufacture of a specific composition. For example, it is recommended to use previously rolled paper strips.

The main thing is to show imagination and diligence when assembling.

Flowers from paper napkin

Graceful flowering plants can be built from ordinary napkins. Very simple manufacturing helps to attract children to this activity. Paper napkins with one or more layers can develop into different types of flora. One has only to successfully choose the scheme and color scheme.

You can learn this technique using the example of a lush flower. It is better to use dense material, since it retains its shape perfectly, and the folds on the folds are well pronounced. You will need to take 5 napkins for one product. To increase the splendor, you can use from 7 to 10 pieces, but it is advisable to make the blanks of different sizes. Masters advise to intersperse material of different colors.

Manufacturing instruction:

• to form a flower from paper, you need to cut off the edges of the raw material with your own hands in a semicircle or a rounded triangle. Next, you need to give each napkin the shape of an accordion, fastening it in the middle with a strong thread. Then cut off the ends a little, making them uneven to give a torn effect;
• collect each inflorescence into a single composition, putting them together and fixing them at the end of the threads;
• for the density of the masterpiece, the base of the leaves should be glued or tightened with braid;
• if desired, you can attach a ring made of the base material to the back of the product, which will serve to hold a table napkin or cutlery.

Quilling paper flowers

Quilling paper flowers are extremely popular and look spectacular and beautiful, especially if they are made by hand. They can be used to decorate holiday packaging, box, photo frame, greeting card. The technique is simple, but it takes patience and time to complete it.

This technique can also be called "paper rolling", since it involves the twisting of elongated paper strips of different structures. Stripes from pearlescent, shiny or matte raw materials will look spectacular.

The simplest manufacturing technology is as follows:

There are many ways how to form compositions using the quilling technique. The main thing is to have a diagram that has the outline of the image, and the details that fill it. For beginners, it is better to get experience in making light patterns.

What paper can be used to make flowers

Flower arrangements, both voluminous and the simplest, can be created from simple office sheets, while not only pure white, but also colored.

Types of paper that can be used to make flowers:

• corrugated;
• kraft paper;
• packing;
• newspaper, suitable for making bouquets in a printing house;
• notes that will be an excellent solution for decorating a music class;
• geographic Maps;
• catalogs of cosmetics;
• used writing paper;
• magazines;
• tracing paper;
• graph paper;
• multi-colored foil;
• material painted with different banknotes;
• parchment;
• cigarette.

Decorations made from colored paper baskets will look stylish in children's institutions.

Chamomile

How to make chamomile:

If the chamomile is performed in a quilling style, you should:

• make paper strips 3 cm wide in white, yellow and green;
• wind on an awl, then remove and slightly loosen;
• to get a drop-shaped shape, you need to pinch the petal a little on one side;
• fix the ends of the strips with glue. For the splendor of such droplets, you will need a lot.
• we make the middle of the future flower from a yellow blank. On one side of the fringe strips, cuts are made as thick as possible. Then we roll it up in the form of a spiral. Attach petals to the back side;
• from the corrugated material, winding it exactly on the rod, make the stem. Attach a flower to one of the ends of the resulting blank.

rose flower

It is not at all difficult to make a rose flower from paper with your own hands:

To create a bouquet, you will have to make many such blanks. Choose the color of the paper as you wish.

Aster

Several options for its manufacture are offered.

1st way:

2nd method (basket of asters):

• for the base, cut the foam to the desired size and insert it into the cake box;
• fix the candy on toothpicks with tape;
• make 6 strips of 25x7 cm in size from corrugated paper and fold them in length 4 times;
• make cuts in the form of teeth on one edge;
• round the fringed ends with scissors, and stretch the one-piece edge, giving a rounded shape;
• wrap the structure of sweets with the resulting blank, so that the cloves are inside, and connect with tape from below;
• thus wind 2 more pieces. paper strip;
• wind the next three edges with curled teeth outward;
• make a sepal from green raw materials, while rounding the tips;
• wrap the toothpicks with a green corrugation, securing it with glue and wrap the bud with a sepal, also gluing them together;
• decorate the box with corrugated material and stick the created flowering plants into the foam.

Tulip

To make a tulip using corrugated paper, you will need skill, because the work has to be done delicate.

These spring gifts of nature are created as follows:

• first of all, you need to make a cardboard blank of the petal, and with its help cut out the required amount (6-7 for one flower);
• then you should take up the formation of the pistil and stamens. Pick up a medium-gauge wire and wrap a 5 cm piece with corrugated paper of black or brown shade - you get a stamen, to which you attach one leaf with glue;
• take a wire of a small circle and wrap a piece 4 cm wide in white paper. It is necessary to create a couple of such blanks and cut in half. Lay them out in the form of a cross and glue them to the petal;
• using this technology to prepare more stamens;
• tie all the stamens and pistils made with white thread;
• form a bud by attaching the rest of the petals to the wire;
• you can use a larger wire and fix the bud on it with a thread;
• cover the entire stem with a green thread. Make sheets of paper and glue them from below.

Candy tulips look beautiful. To make them, you need small round candies in foil. They should be wrapped with corrugated material and attached to a wire, to which the petals of the expected bud will then be glued.

Pion

To create a peony flower from corrugated paper with your own hands, you must:

If you use many different colors, you get a lush, attractive peony. For example, taking 7-8 shades to make a gradual transition from a light tone to a darker color. To create the finished look of the flower, put green corrugated paper in the lowest layer during the bud formation.

How to make a paper flower garland

Flowers for garlands can be made in small and large sizes. Small products are combined into garlands that decorate any part of the room.

To make a paper flower garland, you should:

1. Cut out a flower template from cardboard, and use it to make an even number of paper elements. Choose a color scheme based on the theme of the celebration.
2. Take the line and straighten it. Next, glue the two parts together in such a way that the connecting thread is located in the middle. We go to the end along the entire length of the base, after which we tie a ring at each end of the fishing line, with which the garland will be attached to the holders.
3. It is advisable to arrange flowering elements with an interval of 3 cm from each other.

If desired, it is worth using stencils with complex ornaments. The main thing is to accurately and evenly make paired parts.

Making flower bouquets

Flower bouquets are often made using candy.

To make a simple flower, you need to cut a 9x8 corrugated quadrangle, cut off the bottom corners, and give the upper corners a rounded shape. Then stretch the resulting part from the middle and wrap a round candy with it, which was previously connected with tape with a skewer. You will get a closed bud. At the bottom, fasten it with a thread.

For an unblown bouquet, you will have to make many such blanks and fasten them together. To make blossoming flowers, prepare 8 3x8 pieces for each craft.

Do in the same way as in the previous option, only stretch in the center and on top. Bend slightly cut ends to the other side with a thin stick. The petal will look like a real one.

To get an open flower, glue new petals to the blank with a closed bud. Put each next one on the previously glued leaf. To form the trunk, take a 6x8 piece of paper, which is then cut to resemble a fence. Then twist the cut parts and glue them to the flower base.

Blooming balls for decoration

You can make not only a flower out of paper, but also a real flower ball with your own hands. It is good for them to decorate the room, both for a holiday and on a weekday.

The easiest way is to execute the ball using regular napkins.

It is interesting to make such a craft together with a child. To do this, it is necessary to crumple the old newspaper in a dense ball and rewind it with woolen thread. This will be the foundation. Then fold the paper napkin in 4 layers and fasten the middle with a stapler. Use scissors to round the ends of the square and press them to the center in layers. Glue the resulting roses to a previously prepared newspaper.

The resulting composition can be decorated with beads, colored paper leaves and placed in a vase or attached with a ribbon to the ceiling. Another type of balls can be made from corrugated paper. First, make a round base for the future composition. It is necessary to inflate a balloon of the required size and wrap it with a thick thread, previously impregnated with PVA.

After drying, pierce the ball with a needle and remove it from the thread frame. Then glue the resulting frame to a suitable stand (pot, flowerpot). If the product will be suspended, then attach a ribbon to the base, forming a loop out of it. Cut a sheet of corrugated raw material into 3-4 cm pieces by 30-40 cm.

Stretch the resulting strips by hand from one edge, then twist the roll from the other and rewind with a thread. Glue the created roses to the prepared base with the tied side. Fill the entire area of \u200b\u200bthe frame with blanks.

There are a lot of ways to create flowers from paper with your own hands. You just need to choose the option you like and, of course, try it. After all, a composition made with your own hand with love will never fade, it will bring positive and joyfulness.

Video on how to make a flower out of paper with your own hands

How to make a voluminous rose with your own hands, find out in the video clip:

Do-it-yourself paper flowers:

Flowers are a pleasant addition to everyday life and holidays for every woman. And what could be more beautiful than flowers made in an unusual way and donated by your own child? To know the joy of your kid's hand-made gift, we suggest showing him how to make flowers from colored paper with his own hands. Step-by-step instructions are provided for parents who want to turn the learning process into a comfortable game.

Master class number 1

To make big interior you do not need to be a specialist: it is enough to master the simple technique shown in the colorful photo tutorial. Let's get started:

1. Take colored paper the desired shade: you need nine sheets for the main volume of the flower. Start making the first layer, it's the biggest one. Cut the A4 sheet in half, fold the resulting 6 leaves in a pile. Stencil petal on the top sheet and circle (drawing lines with a pencil on the top sheet is allowed).
2. The petal can have any shape (the simplest is shown in the photo). Cut out the petals and make an incision at the base.
3. Use scissors to fold the edge of each leaf. Slide the cut bases on each part towards the center, glue. You will get a volumetric flower element.
4. Glue the petals together so that in the center got a gap.
5. Follow the same procedure with the medium and small layer of the flower. Insert small layer into medium, medium into large: each layer is pre- coat with glue.
6. Fold half of A4 sheet in half and cut into strips: this is necessary for the core of the flower. Collect the straws in a roll, thread them into the middle lumen of the flower. Anchor glue. If desired, thread a decorative stick into the fringe roll and make a flower with a stem.

Master class number 2

In just an hour, you can make a gorgeous flower. It is proposed to show this material to children 5-6 years old who can easily master the nuances creation of a flower from tubules. Mini instruction at your service:

1. Prepare at least 24 parts. For this divide 6 sheets colored A4 paper into six squares, cut. For a flower, use petals of different contrasting colors or make it monochromatic: the choice depends on the goals and imagination.
2. Roll up each square into an oblique tube, secure the edges with glue or a small piece of tape. Bend the sharp tip.
3. Prepare cardboard base. The size of the base is determined by the size of the flower to be produced.
4. Stick on the base of the straws as shown in the photo. Fill the floweruntil it gets the look you want.

Master class number 3

Making flowers with wavy petals is very simple. For this observe the following items.

Prepare colored paper. It is better if you use your own shade for each flower, because in a lush bouquet such brightness will look amazing. Prepare separately green paper - it will serve as the basis for the stem and leaves.

Make a stem: twist A4 sheet in a tight tube and fix the edge with glue. Cut curly leaves using a template or make a fence out of a small piece of green paper.

Move on to the flower head. Divide a sheet of colored paper into 4 identical stripes. Cut each strip with a fringe, the edges of which twist with scissors. Begin to twist the fringe around the stem in a spiral motion. A leaf of the same color will make 4 flowers.

Bouquet of wonderful any preschooler can make flowers: beautiful formalized ribbons, it will be a great gift for the holiday family and friends of women.

Master class number 4

A child of 4-5 years old can make excellent flowers from fringe after you show him a master class. Follow the photo instructionsto make a wonderful and colorful craft.

Master class number 5

The most beautiful roses are made from colored paper or ordinary newspaper sheets. Roses come in handy for decoration nursery and adult rooms, as well as suitable for various crafts that the child has to do in the future. Let's start a master class:

Cut out from a small rectangular sheet of colored paper oval. Make an incision, then continue the movement of the scissors along the contour of the oval, but retreating from it by 1–1.5 cm. Continue cutting until the scissors hit the middle of the template. You will succeed spiral blank.

Begin to twist the strips of the template so that front side looked up. After the flower is completely twisted, secure it to the base-core.

Spread out the spiral and shape it roses.

Master class number 6

If you are a parent of a small child 3-4 years old, it's time to teach him how to perform the simplest daisies from colored paper... Step-by-step instructions will help you better understand the nuances of the creative process, having figured out which, you can give a valuable lesson to your baby. Go:

Bend A4 sheet accordion along the entire length. Find the middle, secure it with a stapler.

Spring is coming, so it's time to take care of the appropriate decor for your home, office or classroom. We suggest using a variety of flower models as a decor, which you make yourself from corrugated or any other colored paper. Moreover, do-it-yourself paper flowers are made quite simply.

At first glance, the flowers shown in the photo and compositions from them may seem too difficult to make, especially if you are still a beginner in needlework. However, everything will be much easier, you just have to stock up on the necessary materials and tools and get started! Step by step you will be convinced of this.

Let's start with simple options that are easy to make even for beginners.

Paper craft tools and supplies

For the first craft, you will need scissors, glue, a round pencil and colored paper - green, for the leaves, and the color you need (red, orange, pink, yellow) for the petals of your future flower. In the photo you can see the manufacturing process, and for all its simplicity, the craft is very beautiful.

The next flower is even easier to make, however, in order to develop all-round skills, we recommend doing this work, especially since the result of your efforts will be worthy.

You will need:

• soft wire,
• colored paper,
• scotch tape (transparent and colored),
• buttons of the right size and color,
• thick colored paper (suitable glossy magazine pages, notebook covers, etc.).

The whole simple process is visible in the photo:

Aster made of paper

Building on the theme of the first flower, let's do something a little more complicated, like asterwhich also looks very good. To do this, cut out blanks from red, orange and / or pink paper, as shown in the figure. Each blank should be slightly smaller in order to end up with a voluminous flower head. The layers are glued together with any suitable glue (hard or PVA) and then a piece of wire is threaded through them - the future stem, which is pasted over with green paper or colored tape. We glue the leaves to the stalk, fill in the middle (yellow plasticine, a piece of foam rubber, a colored cotton ball, etc.).

DIY paper callas

Callas - very delicate and beautiful flowers that are good to form into bouquets. Japanese craftsmen offer a simple and very successful way to form a flower, which requires soft wire, colored paper, green tape or paper to trim the wire stalk. After making the required amount, form a bouquet.

Instruction: paper flower garland

A flower garland also looks good in the interior, which can be hung both horizontally with a slight sag, and vertically, hanging several of these garlands of different lengths. To do this, on a strong colored thread (or vice versa, transparent fishing line, as you like) we string flower balls made of any type of colored paper that is at hand.

To create such a ball, you need to repeatedly fold a colored sheet as shown in the picture, then fasten in the center of the resulting multi-layer strip in a suitable way (usually tied with a thread) and cut the edges with scissors, giving them a round shape. We unfold (fluff) the flower and string it on a thread or fishing line.

Create a lily of the valley or geacinth

The next paper flower can be called lily of the valleyand hyacinth, because in finished form it is like both the one and the other. Personally, it reminds me more of a hyacinth, but we won't get hung up on the name, we'd better stretch our fingers and get to work.

Here you will have to tinker a little longer, but difficulties should not arise. In the picture, everything is clearly visible, we only note that the strips cut on the sheet are curled up, it is necessary to draw with scissors (line side) along them, pressing hard enough. To make the flower fluffy and curly, we wind the blanks as tightly as possible on a stick pasted over with green paper, starting from the top, smearing the “stem” with glue.

In the second photo, the option is somewhat simpler, the inflorescence is made according to the principle of green leaves from the first option:

Corrugated paper color options

There are many options for making paper flowers, but most of them have many similar features, such as modularity. If you have made the models we proposed above, or you already have good needlework skills, the selection of photos below will help you replenish your collection of crafts and decorate the room with dignity. Good luck!

Bulky paper flowers are used to decorate interiors, furniture, ready-made accessories, gift wraps, postcards. Making them is easy: the process does not require any special skills, it is exciting and enjoyable. Combine business with pleasure: try making flowers in different ways.

Making paper flowers is a simple process. The material is affordable and inexpensive, it is easy and convenient to work with it, so even beginners who have not previously been involved in needlework will master the process. Studying detailed master classes will provide an opportunity to find successful options and get exclusive jewelry. By the way, it is popular in 2017-2018.

For manufacturing you may need:

1. Material. This can be plain white paper for printing, colored or corrugated, Whatman paper, tracing paper, old newspapers or magazines. It is convenient to make small elements from soft materials, and large ones from dense materials, which must retain their shape.
2. Scissors are used to cut parts. Choose quality ones that will cut the cardboard.
3. Adhesive: universal, silicone, PVA. The choice depends on the type of paper: the denser and thicker it is, the more securely it should be fixed. A glue gun can be used for convenience, protection from dirt and good bonding.
4. Schemes, templates. If a master class with instructions left questions, a visual demonstration will give answers to them. According to the template, you can make perfect blanks, and a detailed diagram will help you figure out how and in what sequence to act.
5. Materials for frames. If flowers are made from paper with stems and leaves, you will need a wire that performs the functions of reinforcing and fixing the composition.
6. Good mood and calmness. Start crafting if you are calm and determined to be successful. Being nervous, angry and worried, you will not achieve a good result and will not get pleasant emotions from the process.

Bulky flowers made of corrugated paper

Flowers from corrugated paper look attractive. To craft them, stock up on materials and tools. Need to:

• wire;
• scissors;
• corrugated paper (green, red, white, yellow);
• glue;
• ribbon.

Process:

1. Cut a strip of wire to prepare the stem.
2. Cut a strip 1.5-2 cm thick from green corrugated paper.
3. Coat the wire with glue, wrap it with a green strip along its entire length (fix the edges with glue).
4. Cut a strip of red (or other) paper: do not touch the lower part, but cut out semicircles or ellipses on the upper part. Wrap the edge of the stem with this blank, having previously coated it with glue.
5. Cut out the rest of the petals and glue to the bud, one at a time. Fluff up the flower.
6. Cut out green leaves, fix on the stem.
7. The first flower is ready, craft the rest, making them multi-colored.
8. Collect the flowers in a bouquet, tie it with a ribbon.

Advice! You can make large flowers in the same way, increasing the size of all parts several times. This will be an original interior decor or photo zone for a holiday.

There is another way: by connecting many flowers, you get a beautiful garland. You will need colorful corrugated paper, fishing line or strong thread, scissors, a needle, glue or stapler.

Description of actions:

1. Cut rectangles out of paper: the same size or 1-2 cm different.
2. Stack the workpieces in stacks of five. Combine elements of the same tone for solid colors, and combine different shades for bright jewelry.
3. Fold each stack like an accordion. Fix the centers with a stapler or bandage with thread. Round the edges with scissors to make the flowers look tender and cute.
4. Straighten and push the edges of the paper elements.
5. String the resulting buds on a fishing line or thread, piercing them with a needle in the central parts.

Volumetric flowers on the wall

Large voluminous flowers will become a non-standard wall decor for any room: living room, nursery, bedroom, hallway. Prepare:

• cardboard for the base;
• scissors;
• colored double-sided paper (can be replaced with stickers - small sheets of paper glued into a block for notes);
• glue.

Master Class:

1. Cut a round base out of cardboard. Diameter - 13-14 centimeters.
2. Prepare paper squares. It is more convenient to use ready-made stickers, since you do not need to prepare parts. If there are none, cut out squares of approximately 7.4x7.5 cm from double-sided colored paper.Quantities for a circle with a diameter of 13-14 centimeters: 24 pieces for the first layer, 22 for the second, 17 for the third, 14 for the 4th and 15 for the core.
3. From all the squares, form small bags (approximately as for seeds). A sharp cone should form at the bottom, a circle with one triangular petal at the top. Connect the edges with glue.
4. Take the base, grease the edge with glue and fix the bags with the back sides (parts with protruding triangular petals).
5. Glue the second, third and fourth rows as well.
6. When making the core, glue the central pouches to the neighboring ones so that the center turns out to be voluminous and neat.
7. A beautiful volumetric flower is ready. You can attach it to the wall with double-sided tape or with a nail and a loop of thread glued to the base.

Postcard with volumetric flowers inside

To please a loved one or friend with a card with a bouquet of paper flowers inside, try to make such a gift with your own hands. Make beautiful voluminous chrysanthemums. You will need:

• colored paper of lilac, pink, yellow, white, green (light green) colors;
• a sheet of cardboard for the base;
• thread;
• scissors;
• glue.

Master Class:

1. For one flower, you will need five circles of paper: two of the largest, two medium and one small. Fold the first circle three times in half, cut out two oblong petals from the edge (deepen the cutout a little towards the center).
2. Expand the circle, fold the petals in half to add volume to the composition.
3. On a large circle, place two medium ones, then a small one. Connect the parts with thread or glue. The center can be decorated with a thread brush or left as it is.
4. Make some chrysanthemum buds.
5. Prepare the base of your card by folding a piece of cardboard in half.
6. Glue the resulting flowers, for example, one in the center on the fold of the cardboard and several on both sides.
7. Cut out the strips - the stems of the flowers. Fix them under the buds.
8. Cut the leaves, fold in half, and clip around the stems.
9. The do-it-yourself card is ready, and the flowers seen inside will definitely delight the recipient!

There is another option for those who love roses. It is necessary to prepare:

• double-sided colored paper (red, pink or white);
• felt-tip pen or pencil;
• scissors;
• cardboard;
• glue.

Manufacturing instruction:

1. Draw a spiral on paper and cut the piece along the line.
2. Twist or bend the edges of a long spiral turn - this is the center of the future flower.
3. Wrap the rest of the spirals on the central part, periodically fixing them with glue for the reliability of the composition.
4. The edges of the petals can be slightly bent, then the flowers will look more realistic and voluminous.
5. Make some more flowers.
6. Fold a piece of cardboard in half to form the base of the card.
7. Glue the buds inside the card.

If the recipient prefers delicate calla flowers, make this paper card for them. You need:

• double-sided colored paper (corrugated is suitable);
• modeling dough or polymer clay;
• universal glue (glue gun);
• scissors.

Description:

1. Make a stamen - mold from dough or clay. But you can crumple the paper and roll it up.
2. Cut a heart out of paper.
3. Place the stamen between the rounded parts of the heart, fix.
4. Wrap the stamen in a petal, leaving most of the detail out. Glue the joined sides of the heart, carefully turn the edges out.
5. Make some buds, glue flowers into a card and give a gift.

Volumetric color templates and schemes

You can make paper flowers using templates or diagrams. After studying the diagram, you will understand the sequence of steps and make the product described by the author identical. Beginners are better off using simple and straightforward options.

The template will simplify the process as much as possible. You just need to open and download the image, transfer it to a Word document or another file and print the image on paper. But large flowers cannot be made according to templates, since the size of the picture is limited by the sheet format.

Volumetric flowers video

Do-it-yourself flowers will be an original interior decoration or an exclusive gift for any occasion. Consider all the methods proposed in the article, choose the one you like, study the instructions and start manufacturing.