Having your own pool brings more than just pleasure. It must be cleaned regularly and in a timely manner; debris, leaves, dust and dirt - all this is blown into the pool by the wind every day.

In order not to one day see a dirty puddle in its place, you need to think about methods and...

The length of time between cleaning jobs depends on the size, location (indoor or outdoor), and frequency of use. Thus, it is recommended to clean the outdoor pool at the dacha once every three days.

And if water purification is, in general, a simple matter, then you will have to work hard on the sides and bottom. To do this, it is better to drain all the water, which is very labor-intensive and impractical.

Functions and structure of a pool vacuum cleaner

Operating principle of a bottom vacuum cleaner

To make cleaning the walls and bottom easier, a pool vacuum cleaner was invented.

To simplify a little, this is a pump for purifying and distilling water, which has several filters. A long hose equipped with a brush and handle removes all contaminated water and debris.

Reaching the pump, all this passes through filtration and settles there. Filters can be changed directly during operation, depending on contamination.

Regular, systematic work with such a device significantly saves time and effort. Nowadays many models of vacuum cleaners from various manufacturers are sold.

They have many advantages:

• no need to change water frequently;
• you can choose a vacuum cleaner of the required power and suitable design from a large assortment available for sale;
• possibility of processing steps, bottom, walls;
• cleaning can be carried out independently, without hiring special workers;
• saving effort, time, money.

It's easy to get lost among the huge variety of garden shears. So, our advice outlined in the article will help you.

Multi-colored decorative phlox paniculata: planting and caring for the plant in the middle latitudes of Europe. .

Pool cleaning methods

Cleaning methods are divided into physical and chemical. Physical cleaning means treatment using an underwater vacuum cleaner, net, brush or filter. All solid particles are removed using such devices.

Filters are the most effective means. Working autonomously, they remove most visible and invisible particles. They are divided into sand, cartridge and diatom.

Sand is the cheapest. The principle of operation is to drive water through quartz sand contained in such a filter. It is very easy to maintain - only regular washing is required.

Cartridge and diatom are the most effective devices, requiring regular replacement of filter cartridges and therefore more expensive.

A clean pool is the pride of the owner

Chemical cleaning

Chemical cleaning solves such tasks as:

• water disinfection;
• maintaining a stable pH level;
• elimination of the smallest particles of fat and dirt that filters cannot cope with;
• destruction of algae.

There are several ways:

1. Chlorination is an affordable, time-tested, effective method. Water treated with bleach remains disinfected for a long time. This economical method also has disadvantages. The main one is the risk of developing pulmonary and allergic diseases;
2. Ozonation- the most environmentally friendly method. A strong oxidizing agent, ozone disinfects water 100% and then, when released into the environment, mixes with air, forming natural chemical compounds. At the same time, all useful microelements remain in the water.
3. Ultraviolet irradiation rids water of all harmful microorganisms. Organoleptic properties remain unaffected. But such treatment does not destroy harmful elements in heavily polluted water and is effective only with daily exposure;
4. Ionization– disinfection by contact of water and non-ferrous metals. This safe method has significant drawbacks. Thus, ionization does not destroy fungi and some microorganisms;
5. Active oxygen, as a cleaning method, is very effective in home small pools. The chemicals react with oxygen and the resulting compound disinfects the water. But here you need to accurately calculate the amount of reagent, since an overdose can be dangerous.
6. There is also a method electrophysical cleaning, which consists in the use of UV lamps, ozonizers and devices that emit copper and silver ions. This is a very effective and safe method for health, with which you can throw away all the “chemicals”.

Ozonation is the most environmentally friendly method

Main types of vacuum cleaners

There are three types of pool vacuum cleaners: manual, vacuum or semi-automatic, automatic or robotic:

1. Handheld vacuum cleaner- This is a brush on a rod with a hose that is attached to the pool filters. By moving the brush over the surface, you can remove dirt, mucus and debris, which during processing fall into the pool filter and are then cleaned out from there. This is the most budget option for underwater vacuum cleaners;
2. Vacuum (semi-automatic) The vacuum cleaner also consists of a brush and a hose connected to the filtration. The peculiarities of its work are involuntary bouncing movements, during which it collects large debris very well, but copes mediocre with small ones;
3. Robots(automatic vacuum cleaners) is a relatively new product that, as the name suggests, works autonomously, without human intervention. One of the advantages it should be noted is that it does not need to be connected to the filtration system. Excellent treatment of waterline, bottom, walls and steps. Removes both large and small debris. Models for public and private pools are available.

Self-production

You don’t have to buy all these expensive devices, because you can make a water vacuum cleaner for the pool yourself. This requires desire and minimal technical skills.

The brush and pump are the two main parts of any pool vacuum cleaner.

Using a brush, plaque is effectively removed from the walls and dirt from the bottom. You can either buy it or make it yourself. There are three options on how to do this:

1. Taken furniture brush from a vacuum cleaner and connects to the pump water intake hose. It is in every home and is practically never used. But it has significant disadvantages: a narrow slot and small size, which will significantly lengthen the cleaning of the pool.
2. In the second option You need to cut off 20 to 30 cm from a polypropylene pipe, which is sold for water distribution. Then the pipe must be cut to a width of 3-5 mm and cut into two parts. Insert the resulting two halves into the tee for plumbing. Solder everything and insert another polypropylene pipe into the free hole. It will be the adapter between the pump hose and the brush. Pieces of pipe with a slot are closed with plastic plugs. All!
3. Third option– this is an improvement of the plastic brush made according to the second option. You need to glue an elastic band from car wipers or a narrow bristly strip to the pipe with the slot; the plaque will be removed much better and faster. You can screw it with self-tapping screws or glue any part that will help you work more efficiently. It's just a matter of ingenuity and creative ingenuity!

There are several nuances to note here. The edges of the pipe must be sanded or filed; they should not scratch or damage the surface with sharp corners. Materials for gluing and soldering must be of high quality, because the work will be under water.

Watch an explanatory video that shows you how to make a bottom vacuum cleaner for a pool with your own hands:

Connecting and operating the vacuum cleaner

To connect, you need to attach a corrugated hose to the water intake site, usually installed on siphons under the sink.

There are two connection methods:

• using a tightly fitted sewer adapter (preferably a rubber one), tightly adjacent to the water intake and hose;
• using a plunger, in which a hole is cut exactly in the middle, where another piece of plastic pipe is installed. This device is placed on the water intake.

Connecting vacuum cleaner parts

The handle for the brush can be made from a plastic pipe. Recommended length is from 1.5 to 2 meters. Install the finished vacuum cleaner, start the pump and begin work by processing the walls.

Then the topside, waterline and vertical walls are cleaned. Cleaning the bottom completes the job.

Work on cleaning the pool from debris

Working with a vacuum cleaner made by yourself will be both pleasant and interesting. It's well worth the time it takes to purchase the parts needed and assemble it. By making one, you will save money and be able to clean your pool regularly.

If you figure out how to make a pool vacuum cleaner with your own hands, your outdoor pond will always be clean. It will give you real joy from taking water procedures.

Having your own swimming pool, built in the country house or courtyard of a private house, brings a lot of pleasure. However, you need to understand that this design requires regular cleaning. If you do not clean it, very quickly the luxurious pool will turn into a large puddle in which frogs and other living creatures will appear. It is clear that no one will use such an unattractive reservoir. The specific interval between cleanings is selected taking into account where the pool is located (in a pavilion, on the street), what its geometric parameters are (length, width, capacity), and how often it is used.

Pool cleaning

It is recommended to clean outdoor structures every 3-4 days. This frequency is due to the fact that debris and leaves constantly fall into them. Even in cases where you have equipped your pool with a high-quality filtration system, it must be cleaned within the specified time frame, since no filters can prevent the accumulation of plaque in the bowl.

In principle, it is not at all difficult to clean the water with which the structure is filled. There is a special one for this. But cleaning the bottom of the pool and its sides from sediment requires considerable effort. Previously, a similar operation was performed as follows: water was drained from the bowl and the sludge was removed manually. This procedure required considerable effort and time. And the cost of water, which must be constantly drained and refilled, is not at all small.

Drainage pumps allowed us to solve these problems. With their help, cleaning the pool has become easier. Especially if you have installed an automatic or semi-automatic pump. Similar equipment from well-known manufacturers (Intex, AquaTron, Watertech) cleans water facilities independently using special brushes. Perfect option. But, unfortunately, submersible units (the same Intex) are not cheap. Not everyone wants to equip their country hot tub with such a pump.

Pool cleaning chemicals

Currently, owners of small country pools most often use hand-held vacuum cleaners to care for them.

They are made in the form of simple designs with a brush and a bar. After starting, the hand-held vacuum cleaner begins to remove accumulated sediment and all other contaminants from the sides and bottom. Dirt is absorbed by the unit and retained on the filter. The technique is simple and understandable. Its only drawback is that you have to change the filters on the vacuum cleaner quite often. Manual cleaners are ideal for film frame, inflatable and any other small-capacity pools. And most importantly, you can make a vacuum cleaner for your country pool yourself, spending mere pennies on such an operation. Let's talk about this.

A homemade vacuum cleaner is very simple to make. You need to stock up on the simplest materials that are available in any store that sells sanitary equipment, and spend a minimum of time performing all the necessary operations. You will need to purchase:

• brush;
• plunger, plumbing fitting (they will be used as a basic intake nozzle);
• corrugated hose;
• , plugs and tee.

DIY brush

You can use any brush for the water cleaner. If you don’t want to suffer, you can use the one that comes with your home vacuum cleaner and is never used (or very rarely). With this brush you can clean your pool. But there is one problem. Vacuum cleaner brushes are usually small in size. This means that the process of cleaning the pool can be seriously delayed (even when you have a small inflatable or frame bowl).

If you don't plan on spending too much time cleaning, it's advisable to make your own brush. The instructions in this case are simple. Take a polypropylene pipe. Cut a part from it (about 0.25–0.3 m), and then make a 4–5 mm slot along the cut piece of tubular product. After this, cut the completed workpiece in half, insert both parts into a plastic tee, solder them, and close both halves at the edges with plugs (polypropylene). In the third outlet of the tee, install another piece of polypropylene pipe (now whole, without cuts). This part will serve as an adapter between the hose and the brush.

The homemade manual pool cleaning device is ready. It can already be connected and used. But it’s better to slightly improve our brush so that it works more efficiently. To do this, just glue an elastic band from a regular wiper installed on the windshield of a vehicle onto a polypropylene pipe with a slot. This brush additive removes dirt from the bottom and sides of the pool very well.

If desired, instead of a rubber band, you can mount a strip with stiff bristles or any other device on the pipe that will effectively remove dirt. All additional parts are either screwed to the pipe with small universal screws or glued. In the latter case, you need to use a good adhesive, since we will place the hand-made brush in water. There should be no burrs or sharp corners on the edges of the brush. These defects can tear the surface of inflatable pools and scratch frame structures.

Let's move on to the final work. We need to make the pool water vacuum cleaner airtight. To do this, take a corrugated transparent hose, mount it to the place where the water is drawn, and securely fix it.

Cleaning the pool with a vacuum cleaner

Connecting the corrugation is carried out using two methods:

1. Take a plumbing plunger and make a hole strictly in its center. Insert a small piece of polypropylene pipe into the latter. Then place the plunger on the water intake.
2. Purchase a plumbing fitting (sewer adapter) and install it on the water intake. Here it is important to choose a part that would fit the hose as tightly as possible and ensure a tight connection.

Now we need to build a handle for our homemade cleaner. It is made from polypropylene pipe. The handle should be connected to the brush. The length of the holder for a homemade vacuum cleaner is taken to be no more than 200 cm. After assembling and installing our device, you can start the pump and check its functionality. In cases where the water is sucked in without problems, cleaned in the filter device and discharged back into the font, it is allowed to begin cleaning the pool.

Experts advise starting this process from the side parts of the bowl. Clean the walls of the pool using a vertical brush stroke (be sure to remove dirt from areas above the water as well). Then remove the sludge from the bottom. The entire process of cleaning a medium-sized pool will take you 50–60 minutes at most.

If you have a swimming pool, you definitely need to clean it. Moreover, this is not affected by the quality of the installed filter. Dirt, debris, fallen leaves, hair - all this gradually accumulates on the bottom and walls of any hydraulic structure. The most profitable way would be to produce. However, if it is not possible to purchase it, there is an option to make it yourself.

What methods are used to clean swimming pools?

Besides using cleaning devices, there are many options for keeping your pool clean. The main ones include frequent replacement of water and cleaning filters. As a result, the water will contain fewer harmful microbes and its quality will be higher. However, it is quite difficult to follow these rules, because ideally you need to change the water at least twice a week, or even more. It all depends on the degree of contamination and the size of the hydraulic structure.

Even the smallest pool can hold a huge amount of water, translating into numbers - up to tens of cubic meters. Therefore, it is not cost-effective to change the fluid so often. It’s okay with its consumption, but what to do with the water that you drain. So if you don’t want to create a swamp with harmful microorganisms, a hand-held vacuum cleaner is the best option.

Cleaning process shown

There are several other methods you can use:

1. There are special pumps with cleaning filters. Their work is aimed at purifying water directly. Depending on the device used, the degree of water purification will vary. This way you will kill harmful microorganisms that may live in a dirty environment.
2. The second effective way is to use chemicals. They also purify water at the cellular level. You won't be able to get rid of large amounts of trash this way.
3. You can use very simple tools: a net and a brush. However, without a suction filter, dirt will not leave the floor, but will only spread across the surface. It is good to use a net before using a hand-held vacuum cleaner to remove leaves and large debris.

Read more: Stainless steel kitchen sink - product features and installation

Thus, cleaning the pool no longer seems as easy as it might have seemed when you purchased it.
In order to make a water vacuum cleaner for a pool with your own hands, you need to have an idea of ​​its structure.

The design of such a vacuum cleaner is shown

If we briefly and clearly describe the principle of operation of a hand-held vacuum cleaner, it boils down to the usual distillation of water and passing it through several filters. There is a main pump; it pumps water that enters the hose through the brush. It is thanks to the brush that all plaque on the walls and floor of the pool moves away from the surface and is absorbed by the filter.

Note. Depending on the level of contamination of the pool, you may need to change the cleaning filter several times. So evaluate the power of the device in advance and, if necessary, purchase additional filters.

To ensure proper pool cleaning, go over the areas where the pool is dirty several times. This way you will get more effect.

6 rules that will help you clean your pool less often:

1. When you are not using your pool, make it a habit to cover it.
2. Protect the pool from animals swimming in it. Also stick to the specific clothing you wear when swimming.
3. Use a net and frequently collect large debris from the pool surface.
4. Purchase a chemical solution that will prevent the accumulation of harmful organisms in the water.
5. Change the pool water at least once a week.
6. Remember that cleaning a dry pool has a better effect. So remove accumulated deposits from the sides of the hydraulic structure by first draining the water.

Structural diagram of cleaning

DIY vacuum cleaner

Perhaps some of you have ever thought about how to make a pool vacuum cleaner with your own hands.

The first thing we'll start with is the brush. Its main purpose is to scrape off plaque from the surface of the pool. This is an important part of the work, since the filter cannot do this on its own. There are two scenarios here. The first involves creating a brush from improvised materials, because its design is very simple and does not require special materials. Or you can purchase this device in a store. Its cost is not high, so everyone can afford it.

Read more: How to change the gasket in a bathroom faucet yourself?

If you decide to start creating a brush yourself, then you need to know several options on how to do this:

1. The first method is to use a brush from the attachment of a home vacuum cleaner. Surely you have at least one attachment you don’t use. It can be attached to a hose. There is only one nuance - size. Cleaning with it will take you a lot of time and effort.
2. The second method involves using a polypropylene pipe. Take a small length, about 30 cm and cut it along the length. Divide the product into two parts and insert it into a special tee, which is used for installing plumbing at home. You can't do this without soldering. We took two adapter holes. Now take another piece of pipe and insert it into the third empty recess. All that remains is to plug the remaining pieces of pipe and voila! The brush is ready.
3. This method involves improving the second option. Here you need to add a couple of details, for example, a wiper blade on a car. Screw the brush onto the pipe and you're done.

Pool owners are very familiar with the situation when dirt settles at the bottom of the reservoir. It is timely cleaning of the pool that will keep the water clean, which will avoid the proliferation of various pathogenic bacteria and microorganisms in it. A water vacuum cleaner can help with this, making it much easier to care for the bottom of a pool or pond.

Why do you need a water vacuum cleaner?

This device has other advantages:

1. The device is quite simple to use.
2. A material moment, because with its help you can save on calling a pool cleaner.
3. You can clean not only smooth, but also angular surfaces and steps.

Another advantage is a fairly wide selection of various models from global manufacturers. But we'll talk about this a little later.

Kinds

The operation of a water vacuum cleaner is based on the operation of two devices. The first is the vacuum cleaner itself, and the second is the aqua filter. All units are divided into two types: manual and mechanical. Handheld vacuum cleaners require the participation of the person himself in cleaning, so they are only suitable for small pools. This device is a long rod, at the end of which there is a garbage bag and a brush, as well as a hose for pumping water. Water circulation occurs through human force, then it passes through the bag. All the dirt that is in the liquid settles inside this bag.

Manual option

As for a mechanical vacuum cleaner, the principle of operation is approximately the same. The only difference is some design features, as well as the fact that water circulation is ensured by the operation of the engine.

There are fully automatic units that are robotic vacuum cleaners. They can clean all the walls of the pool, as well as the bottom.

Automatic design

How to choose a quality model for a pond

There are quite a large number of different devices on the market, so the average buyer often finds himself confused. To make your choice successful, follow these recommendations:

1. If you want to purchase a manual water vacuum cleaner, then you need to pay attention to the length of its handle. If yours, then the handle should match. You should also pay attention to the size of the garbage bag.
2. Pay attention to what comes with the device. Various brushes, spare filters and attachments - all this will be an additional plus when purchasing.
3. If you want to purchase a robot vacuum cleaner, ask the seller if it can clean the walls of the pool. To make this possible, its device must have a special fan. If it is not there, then you will have to clean the walls yourself.
4. The brushes of the vacuum cleaner should be soft enough. The ideal material for them is polystyrene foam, which cleans any surface quite accurately.

If you choose the right water vacuum cleaner, your pool will be clean at any time of the year.

Mechanical Manufacturers Review

If we talk about the most popular manufacturers of water vacuum cleaners, there are several of them - Dolphin, iRobot Corporation, INTEX and Zodiac Group. Each of these manufacturers has a specific list of models that deserve attention.

The Israeli company Dolphin produces vacuum cleaners tailored to the specific size of the pool:

• Up to 10 meters – SUPREME M3 and Galaxy models.
• Up to 12 meters – models Master M4 and M5.
• Up to 15 meters – SUPREME M4 PRO and SUPREME M5.
• Up to 25 meters – Dana 100 and Pro X2.

For the largest pools, whose dimensions are within 50 meters, water vacuum cleaners are designed - Wave and 2x2.

The French company Zodiac is also quite widely represented on the market. One of its latest innovations is the Vortex series. One of the distinctive features of the models in this series is the ability to change the tilt of the pump. Also, robot models are characterized by the presence of an all-wheel drive wheelbase.

The INTEX company not only produces vacuum cleaners for swimming pools, but also related materials for cleaning these structures - skimmers, juicers, hoses, etc.

Good day, dear friends and site guests! Today we will talk about how to make a vacuum cleaner for a pool with your own hands. So, your own artificial pond is a source of positivity and a favorite place for children. But the thing is that it requires care. Otherwise, it will quickly turn into a puddle, teeming with bacteria and emitting an unpleasant odor.

Since it is installed in an open area, leaves, dust and other contaminants often fall into it. You can fight this in different ways. First of all, this is draining the water and manual cleaning. But not always there is a sewage system at the dacha; draining water into a ditch is also not entirely correct. If you do this often, sooner or later conflicts with neighbors will begin. Mosquitoes love to lay larvae in a swampy ditch, which will then prevent them from living a normal life.

How to get out of the situation. We suggest you make a pool vacuum cleaner with your own hands.

Do-it-yourself water vacuum cleaner for the pool: it will save you from dirt

The type of artificial reservoir does not matter at all. We will not talk about capital structures here, since they require a different approach. A person who can spend several million will buy a sophisticated cleaning system along with an artificial pond. But the owner of small tanks has to rack his brains, struggling with manual cleaning.

As we know, water is an excellent breeding ground for a wide variety of bacteria, including those dangerous to health.

Moreover, the font is located in the sun and warms up perfectly. And in warm water, microbes multiply at cosmic speed. Therefore, you need to use not only a water vacuum cleaner for the pool, but also follow some rules:

• It is necessary to cover the artificial reservoir daily to avoid contamination;
• You can use it only after taking hygiene procedures, and only in a swimsuit. It is forbidden to enter it with shoes on and pets must not be allowed to swim;
• You should get a special net or bucket to collect debris that ends up on the surface;
• Chemicals should be used to treat water. This is necessary in order to prevent the growth of aquatic plants and harmful microorganisms;
• You need to change the water regularly;
• When dry, it is thoroughly cleaned and washed. You will also need a special device that helps fight a wide variety of contaminants.

An artificial reservoir will have to be looked after, and this is necessary and very important. Otherwise, in dirty water you can easily catch some unpleasant disease. It is especially important to do this if children are swimming in the pond.

Pool vacuum cleaner device

To make the process of caring for an artificial tank easier, you need to use a pool vacuum cleaner. They significantly simplify the care procedure. This unit will clean the walls and base. You can buy a variety of options in stores. They're just not cheap. It's much easier to do everything yourself. In addition, the work ahead is not the most difficult.

Before getting started, you need to understand the structure of the unit. The main details are:

• A pump that cleans and distills liquid;
• Filter elements;
• Hose approximately 1.5 meters long;
• Cleaning device;
• Pen.

The video (just below) will help you understand how to use a pool vacuum cleaner. During the cleaning process, the unit sucks in liquid, which is then filtered. Maintaining optimal power is ensured by regularly replacing filtration elements. Even a homemade unit has sufficient power, which is quite enough to clean a medium-sized reservoir.

It will save time and not waste a lot of effort doing such work manually. You don’t have to hire specialists, who, of course, have to pay for services.

Main types of water vacuum cleaners for pools

There are three main types of these units:

• For manual cleaning;
• Vacuum type;
• Automatic or robots.

A hand-held water vacuum cleaner for a pool has the following design: a brush that is mounted on a rod, and a hose of the required length is added to it. In turn, the hose is connected to the filter elements of the artificial reservoir. Its manipulations are exactly the same as when working with a conventional unit that housewives are accustomed to using.

You can vacuum the surface; it copes well with mucus, dirt, and debris. Since its structure is the simplest, then, as a rule, it is precisely such units that are made by craftsmen.

Let's make a brush for the future vacuum cleaner

To make a water vacuum cleaner with your own hands, you need some material. You can get them at any plumbing store. The assembly of the unit itself will take a minimum amount of time.

So, to create it we will need:

• Brush;
• Plumbing plunger (it will serve as a simple intake nozzle);
• Corrugated hose;
• Polypropylene pipe;
• Plugs;
• Tee.

Any brush is suitable for our unit. If you have an old unnecessary vacuum cleaner at home, you can use the brush from it. It is also suitable for cleaning the pool. However, this brush has some disadvantages. Its size is small, so cleaning the pond will take more time. Even if the bowl size is small, a small brush may not be entirely convenient.

If you don’t want to suffer for a long time during cleaning, then there is a fairly simple way to make the necessary device.

To do this you will need:

• Polypropylene pipe;
• Tee made of plastic;
• Plugs.

You need to take a polypropylene pipe, cut off a small piece, the length of which is 0.25-0.3 m. After this, you should cut along the piece of pipe (a cut of approximately 4-5 mm). Then the piece is cut into two parts, a plastic tee is inserted into them, and then the parts are soldered. Polypropylene plugs cover the edges of the future brush. To the third outlet of the tee, you need to attach another piece of polypropylene pipe (it is not cut).

This part of the part will be used to connect to the vacuum cleaner.

However, the resulting DIY pool vacuum cleaner, as in the video above, can hardly be called a cleaning device. Therefore, it can be improved somewhat by gluing the rubber part from a car wiper onto the pipe in which we made a slot. It will work efficiently.

If you want to make a more convenient device, you can attach a strip with stiff bristles to the pipe. If additional accessories are required, they can be screwed using small universal screws, or simply glued.

Note! You need to use high-quality glue that can withstand contact with water.

The device should be made carefully, since even minor burrs or sharp edges can ruin the material of the artificial reservoir.

Don't know how to make a pool vacuum cleaner with your own hands?

So, how to make a pool vacuum cleaner with your own hands? The skimmer should be disconnected from the inlet type valve that is included in the pump design (although not always). Now you need to connect the corrugated pipe. To do this you need to use a sealant. The free part is connected to a polypropylene pipe.

A nozzle designed for collecting water is placed on the lower part of the homemade unit. You can use our homemade product as a brush. If a plunger or fitting is used, then cuts need to be made in them, which will allow for a tighter fastening. However, it is most convenient to use a brush. There are models of these devices equipped with backlight.

Which one is more suitable depends on the size of the reservoir. Worth paying attention! If you use a paper filter, you need to remove it, since it will not be able to cope with small-sized debris.

Do-it-yourself water vacuum cleaner for the pool: finishing the job

So, our unit is assembled, all that remains is to try it in action. To connect, you will need a corrugated hose, which is installed on siphons located under the sink. Craftsmen use two connection options:

• This method will require a sewer adapter (the most optimal is a rubber one). It is tightly placed on the water intake and hose;
• The next method is to use a plunger. In this case, you need to cut a hole strictly in the middle. A part of a polypropylene pipe is inserted into it. This design is installed on the water intake source.

Our design lacks a handle. To make it you will need a piece of polypropylene pipe. The optimal length is 1.5-2 m.

Now you can use our DIY pool water vacuum cleaner. You need to turn on the pump and start cleaning. First, clean the part that is located above the water, the walls. At the final stage, the bottom is tidied up. Of course, the work of making a homemade unit will take a lot of time. You will have to allocate part of the budget for the purchase of spare parts.

But this is fully justified by the significant savings in money.

Why a vacuum cleaner is convenient and why you should make it yourself

In fact, this is not the standard unit that we are used to using when cleaning the apartment. This is a pump that purifies water by distillation using several filters. The handle makes it easy to clean the sides and bottom. There are models that allow you to use several filters, or change them during operation if the contamination is strong.

Thanks to the video (at the end of the article) on how to create a vacuum cleaner for a pool with your own hands, we successfully completed our job. In turn, the unit does an excellent job of removing sediment and unpleasant plaque. You can remove stains and film. If you use it correctly, it will help you for a long time. And you won’t have to spend a lot of time and effort on general cleaning.

Is it worth making a pool vacuum cleaner yourself?

Today, purchasing a ready-made unit in stores will not be very difficult. The range of many manufacturers is represented by a variety of models. Therefore, you can easily find what you need. However, the cost of the units that are used to maintain the reservoir varies greatly.

A small unit will cost several thousand. It’s just difficult to predict how well he will do the job. A powerful device is expensive and will require serious expenses. Automatic robotic devices that can move along the bottom of the bowl remove dirt well. But their cost reaches several hundred thousand.

So, a DIY pool vacuum cleaner is an excellent solution that can save a decent amount of money. In our article we analyzed all the stages in detail. Of course, you can purchase a ready-made one. But is it worth spending so much?