Foamiran diy schemes. Crafts from foamiran: master class and instructions for beginners

V recent times the hobby for needlework, crafts from various materials, including from foamiran, has become popular and fashionable. Master classes are held on making various flowers, dolls and jewelry from this material.

Such products are used to decorate hairpins, headbands, clothes and shoes, and also use flowers from foamiran to decorate interiors in the form of various panels and bouquets set in vases.

Master classes for making flowers from foamiran for beginners can be easily found on the Internet.

Foamiran is a soft decorative foamy sheet synthetic material, which is a type of suede fabric, also known as revelor, foam, plastic suede, foam rubber, EVA shape.

Due to its large palette from 20 to 24 tones and pliable properties, structure, it is often used in needlework in the manufacture of various toy figures, jewelry, artificial flowers, bouquets, and garment decorations.

Foamiran consists of porous rubber, which is foamed using a special technology, and because of this it is very well exposed to various treatments and manipulations with it. The main property of foamiran is pliability when exposed to even a slight elevated temperature. It becomes elastic and you can give it any desired shape and shape.

Plastic suede is another name for foamiran.

Among needlewomen, the Chinese and Iranian foamiran is especially popular, it is inexpensive, of good quality and with unique properties.

Foamiran properties:

  • under the influence of the warmth of the hands takes the desired shape;
  • when using the iron it becomes voluminous;
  • retains the shape that it was given after cooling completely;
  • you can easily cut or cut small parts with scissors;
  • can be painted in any color, both with acrylic paints and pastel crayons;
  • cut down with a punch or hole punch;
  • parts are connected with glue of strong and medium fixation.

When choosing foamiran, you need to know that there are several of its varieties.

The most popular and frequently used types:

  • Iranian foam, which is made using a special foaming technology, is produced in sheets of 60/60 cm, the thickness of the edges is uneven up to 1 mm;
  • Turkish revelor, uniform thickness and produced both in rolls and sheets;
  • Korean foamiran, material of good quality, retains its shape well, with a thickness of 0.6 to 1 mm.

For execution flower arrangements or individual colors, a thin silk foam or glittery with glitter revelor is best suited. Excellent for making petals marshmallow foam because of its airiness, softness, pliability, does not require heating and is well-colored in the desired colors.

Foam is widely used in artificial floristry. This material is perfect for making and composing a variety of colors.

Tools and materials for work

To learn how to work with foamian, they conduct master classes on making flowers for beginners with step-by-step instructions.

For this you will need:

  • foamiran, several sheets of different colors;
  • patterns and patterns;
  • curly scissors;
  • for the manufacture of small parts hole puncher;
  • glue gun for gluing parts;
  • to shape the petals and create volumetric and curved surfaces - iron;
  • small decorative elements;
  • molds and weiners to give the blanks the desired shape and naturalness;
  • brushes and sponges for applying paint;
  • floristic wire for stems;
  • tape tapes.

For making flowers, it is best to take marshmallow or Iranian foamiran.

Master class in stages for beginners

To make snowdrop flowers from foamiran, you must:

  • white sheet foam;
  • olive-colored revelor;
  • green teip tape;
  • stem wire;
  • scissors;
  • hot glue gun;
  • acrylic paints and pastel crayons;
  • iron.

The step-by-step instruction for creating a snowdrop consists of 3 stages: cutting, gluing and decorating.

Cutting out

Instructions:

  1. Draw on a white sheet of foam with a toothpick the outlines of flower petals, 3 large and 2 small.
  2. Cut out the resulting snowdrop petals along the contour.
  3. On the inside, we tint the petals with green paint, previously drawn hearts and painted over with chalk.
  4. You need to lean the petal against the heated soleplate of the iron. At first it will stick, but as it heats up, it will start to lag behind. Use your fingers to shape the petal until it cools. Repeat the procedure with all blanks.
  5. We make the middle of the snowdrop from the purchased ready-made stamen, which is attached with glue to the wire-stem.

Gluing

Instructions:

  1. Small petals are first attached to the wire with the stamen glued to it using a glue gun.
  2. On top of the stamen and small petals already collected together, large petals are glued.
  3. It turned out a half-opened snowdrop

Registration

Instructions:

  1. To create the effect of an opened snowdrop, you need to bend the larger petals back and apply a little hot glue to their base. When the glue dries, the petal will remain in the folded position.
  2. We make a stem from teip tape. Tear off the tape of the required length and cut into 2 ribbons. We wrap the wire with them from below towards the bud in a spiral.
  3. Create the leaves from the olive leaf of the foam leaf. Cut out 1 small, 2 large oblong leaves. On large leaves, paint over the middle with green chalk. Then, using your fingers, we give them the desired shape.
  4. To make the snowdrop look natural, you need to bend the leaves, and glue them at the fold.
  5. First, glue one leaf to the bottom of the stem, and then the next leaves.
  6. We make the last inspection of the snowdrop and touch up visible flaws with our fingers.

Master class (instruction) for creating flowers

To create each flower of a different kind from foamiran, there are provided step by step instructions and master classes for making flowers. The principle of making different colors is the same, only the difference lies in the complexity of execution and the number of parts during assembly.

Lily

To create a lily from elastic foamiran you will need:


Step-by-step instructions for making a lily:

  1. We make a template from cardboard and cut out a petal 60 mm long.
  2. We cut out 6 pieces of petals from a white sheet foam according to the resulting pattern.
  3. We tint the petals with a pink-lilac shade using acrylic paints.
  4. To give volume to the petals, we heat them with an iron, and draw the veins with a toothpick.
  5. To make the ends of the petals wavy, they are also heat treated with an iron.
  6. At the bottom of the petals, use a brown felt-tip pen to apply dots to make the lily petals look natural.
  7. On the prepared wire pieces 5 mm long, glue the stamens and small diamonds from the foam, painted black.
  8. Cut out the leaves from the green leaf of the revelor.
  9. To make it figured, we heat the leaves on the iron.
  10. Glue a row of 3 petals to the base with stamens and pistil.
  11. In the order of chess, the second row of petals is glued.
  12. The leaves are glued from below in random order.

chamomile

To make chamomile flowers from foamiran you need:

  • sheet of white foam;
  • cardboard sheet;
  • glue gun;
  • pastel crayons;
  • compass;
  • iron.

Chamomile making process:

  1. On a sheet of foam using a compass, make 3 circles with a diameter of 90 mm, cut them out.
  2. Cut out a strip of 270 mm long and 20 mm wide from the revelor and paint it with yellow paint. This is a blank for chamomile core.
  3. Fold the yellow strip in the middle, glue the edges and cut into thin strips from the fold side to create a fringe.
  4. We twist the base, having previously glued it, in the form of a spiral.
  5. Cut out a circle with a diameter of 90 mm from cardboard and use a conveyor to draw the places for cutting the petals.
  6. A cardboard template is needed to cut chamomile petals.
  7. Without cutting 0.2 cm to the center, carefully cut the circles into petals.
  8. With the help of an iron, we round the chamomile petals, giving a natural look.
  9. We put the blank on the core and glue it.
  10. We do the next 2 layers of petals in a similar way, gluing them together.

Poppy

To create a poppy flower from foamian is not so difficult as it seems at first glance, for this you need:

  • sheet of red foam;
  • green revelor leaf;
  • wire;
  • bead with a diameter of 20 mm;
  • cardboard sheet;
  • black threads;
  • glue;
  • toothpick;
  • scissors for cutting out parts;
  • iron.

Poppy creation instructions:

  1. Draw a poppy petal on a piece of cardboard and cut out a blank.
  2. Cut out a circle with a diameter of 60 mm from green foamiran.
  3. We stretch the wire through the bead and twist it, form a stem.
  4. We heat the workpiece on an iron so that it becomes elastic, and wrap a bead with it, fastening the edges near the wire.
  5. We fix the green foam on the bead with threads to make intersections.
  6. We make stamens from black threads and attach them with glue at the base.
  7. Using a toothpick and a blank, we make petals from red revelor and cut them out.
  8. First, fold the leaves in the form of an accordion, then twist them with your fingers.
  9. We straighten the petals, this is done to make them look natural.
  10. We glue the petals to the base in two rows.
  11. Cut out 2 leaves from the green foam, trim them along the edges, repeat the twisting.
  12. From below, under the petals, we attach the sheets with glue and cut off the excess wire.

the Rose

One of the flowers made from foamiran is a rose.

A master class for making a rose provides for the presence of such materials:


How to create a rose:

  1. We cut out 2 blanks of petals from cardboard, one larger, the other smaller.
  2. We place the patterns on a pink sheet, and circle them with a toothpick, then cut them out with scissors.
  3. We lean alternately the petals against the hot iron so that the edges become curved.
  4. Roll a ball out of a piece of foil and wrap it in a conical shape with a small petal and glue it.
  5. Next, glue the small petals so that they form a bud.
  6. We attach large petals in rows on the bud blank and fix it with glue.
  7. Cut 6 pieces of leaves from the green foam.
  8. We heat the leaves with an iron so that their edges become curved and attach them with glue to the flower.

Sunflower

To create a flower from foamiran you need:

  • white sheet revelor;
  • a sheet of cardboard;
  • glue gun;
  • curly scissors, awl;
  • teip tape green;
  • toothpick;
  • paints;
  • iron.

The process of creating a flower step by step:

  1. On cardboard we draw rectangular shapes of different sizes, 4 types and cut out the patterns of the petals.
  2. Wrap a large toothpick with green tape, this will be the stem.
  3. We circle all 4 types of petals 12 times on a white sheet of the revelor with an awl, then cut it out.
  4. We paint all the petals yellow so that the color is more saturated by the beginning of the petal.
  5. Draw and cut 4 sunflower leaves and paint in green at both sides.
  6. Cut a strip of one meter long and 20 mm wide from the sheet foam.
  7. Paint the strip black and cut it with scissors to create a fringe.
  8. We twist the fringe into a roll on the prepared stem and fix it with glue, we get the core of a sunflower.
  9. We heat the petals with an iron, giving them a curvature.
  10. We attach smaller petals with glue, and then large ones.
  11. Glue the leaves on the underside of the flower.

Hydrangea

Artificial inflorescences of this flower are often used as decorative decorations for holiday premises.

You can create a hydrangea from foamiran, for this you need:


Master class (process) of creating a hydrangea:

  1. We divide the peach-colored foam leaf into squares measuring 20 by 20 mm. Cut out with scissors.
  2. On each square, we make cuts from the middle of each side to the center, not reaching 1.5 mm. It turns out a flower of 4 petals, with the help of scissors we round off the edges of the petals.
  3. We tint with green pastel on both sides of each core of the flowers.
  4. We heat each flower petal with an iron and apply it to the mold to get natural streaks.
  5. After that, we tint the flowers with pink pastels.
  6. In each flower we make a hole in the center, and insert the purchased stamen and fix it with glue.
  7. When the flowers are ready, collect the hydrangea inflorescence, consisting of 5 pieces.
  8. We attach small flowers to the wire wrapped with tape with glue, giving the inflorescence a natural shape.
  9. Cut out the leaves from the green foam. With the help of an iron and mold, we give them a natural look.
  10. We cut off several pieces of wire 5 mm long and glue a sheet on it.
  11. Then we glue the finished sheets to the hydrangea inflorescence.

Orchid

Natural orchid is a very capricious flower and often does not take root at home. But you can make this beautiful flower from foamiran yourself.

For this you will need:


Step-by-step instructions for making an orchid:

  1. We make a template from cardboard, consisting of 3 parts: a core and 2-petal and 3-petal parts.
  2. Using a toothpick, we make flower cores from a purple foam leaf and cut it out.
  3. Cut out petals from white foamiran according to blanks.
  4. With the help of your fingers, give the petals a shape, stretch them a little.
  5. Cut the wire into pieces 17 cm long and string the beads and twist.
  6. We make a hole in the core with an awl and string it on the wire.
  7. We bring the core on a wire with a bead to a burning candle. When the core begins to curl inward, remove it from the heat source.
  8. The petals pierced with an awl in the center are attached to the structure of the core and beads, gluing them to the wire.
  9. Using a ballpoint pen, draw veins on the petals.
  10. On the long wire at the top, we make a ball of foil and fasten it with glue.
  11. Cut out small petals from a leaf of green foam and close the ball with them to make a bud.
  12. We wrap the entire length of the floristic wire with green tape to create a stem.
  13. We attach ready-made flowers to the stem, and you get a whole orchid.

Pion

Peonies are very beautiful flowers, but they fade quickly. You can do a similar artificial flower to make it happy at any time of the year.

To create a peony you will need:

  • foamiran sheets of white, pink and dark pink;
  • cardboard;
  • wire;
  • bead made of wood, 15 mm in diameter;
  • glue;
  • scissors;
  • iron.

Manufacturing master class peony:

  1. Cut strips 5 cm wide from different colors of the foam.
  2. We make patterns of petals of arbitrary sizes from cardboard.
  3. We circle the pattern with a toothpick on the strips of the foam with a toothpick and cut out the petals. You should get about 70 petals.
  4. Petals should be: small - dark pink; medium - pink and large white petals.
  5. We heat each petal with an iron and give it waviness by stretching the still warm petal with our fingers.
  6. We give the petals the shape of boats, bending them inward a little.
  7. We take a bead and wire to make the base of the peony - the stem and core.
  8. We begin to collect the flower by gluing first dark pink and then pink petals to the bead. Large white petals are glued last.
  9. When gluing the petals, it is necessary to observe some randomness, this gives the peony a natural look.
  10. When the bud becomes voluminous and it is inconvenient to glue the petals, they turn it over and begin to glue it from below.
  11. Dry the flower with a hair dryer and cut off the excess wire.

Foamiran decoration

Foamiran is used in many types of needlework, in master classes for making flowers and dolls, toys and jewelry.

Most often it is used in such cases:

  • when decorating photo frames and photo albums;
  • to create wedding bouquets, boutonnieres;
  • production of ladies' jewelry - necklaces and earrings;
  • create panels and pictures from flowers for apartment decor;
  • make various hairpins and headbands;
  • decorate clothes and shoes;
  • used for children's crafts;
  • making New Year's toys;
  • drawing up flower arrangements for decorating premises for special occasions;
  • execution of decorative cards and invitations;
  • making fridge magnets;
  • creation of small figurines to decorate the interior of an apartment;
  • used in scrapbooking.

Having a little imagination and knowing how to handle foamiran, you can create unique author's products that will delight your loved ones and friends with their uniqueness and beauty, because a piece of the author's soul remains in every handmade fake.

Video master classes on making flowers for beginners from foamiran

Learn how to create roses from foamiran in the video:

An easy way to create flowers from foamiran:

Foamiran products look quite stylish and unusual, and very little effort is needed to make them. Foamiran enough interesting stuff, which in its composition resembles rubber, and in appearance plastic suede. This material has good qualities, in particular, it is non-toxic, it is well colored, it is able to quickly restore its shape, it can be easily cut with scissors, products made from it can be washed with water, changes its shape when heated. If foamiran is thick enough, then various toys can be made from it, while thin sheets are well suited for making bouquets.

Foamiran is considered quite good stuff for making crafts, as it is presented in a variety of colors. Flowers from foamiran turn out to be quite interesting, which can be made both using an iron and without heating the material with special devices. The simplest craft from this material is an ordinary rose.

For its manufacture, you initially need to prepare materials and tools, in particular such as:

  • Green and red foamiran;
  • Scissors;
  • Iron;
  • Hot glue.

From red foamiran you need to cut rose petals of various sizes, and from green to make leaves and a flower rosette. On a warm iron, you need to put a few petals and leave for 3 minutes. Warm petals need to be folded and unfold, while stretching the middle. Separately, you need to make a small flagellum, which will act as the center of the flower.

With hot glue, you need to glue the smallest petals to the base, then the middle ones, and then the largest ones. The prepared leaves and the flower rosette also need to be heated with an iron and glued to the rose.

Thus, you will get a beautiful flower that can be used to make various crafts.

To make flowers without heating, you can simply warm the prepared foamiran blanks by rolling them between your palms and twisting the edges in different directions, as well as stretching the middle. Having prepared a sufficient number of petals, they need to be expanded as they grow. Then form a base from foil, plasticine or any other material. The prepared petals need to be glued around the base in a circle, all the petals in ascending order. Then the base must be carefully removed.

When the flower is ready, you need to cut a receptacle from green foamiran. Form a ball for the receptacle from a small piece of cotton wool and wrap it with green leaves, giving them the desired shape. The result should be a very beautiful and unusual flower.

In order to be able to do more complex crafts, you need to prepare special materials and tools, in particular, such as:

  • Stacks and blooms for rounding the petals and creating veins;
  • Weiners and molds, to give the workpieces a certain shape;
  • Brushes and sponges for applying dyes;
  • Paints;
  • Punchers and curly scissors;
  • Wire for frame and stems;
  • Wire with balls for stamens;
  • Type tapes;
  • Toothpicks;
  • Scissors;
  • Glue gun;
  • Jewelry and accessories.

Using foamiran, you can create a variety of crafts and decorations, the most important thing is to make a little effort. By making more complex flowers, you can create amazing interior compositions, wedding bouquets, hairpins, brooches, headbands and many other accessories. From foamiran, you can make any flower that will look like a real one, especially if it is made from marshmallow material.

How foamiran crafts are made for beginners step by step

Foamiran flowers are especially popular, since their production does not require special experience. Following the instructions step by step, you can make the most unusual compositions where the flowers will look like real ones.

Artificial decorations are widely used for:

  • Holidays decoration;
  • Interior decor;
  • Jewelry making.

A variety of decorations can be made on the basis of flowers, in particular, such as hairpins, headbands, pendants. In addition, you can decorate books, bags, magnets with flowers. To make a hairpin, headband or brooch, you need to glue a strip of foamiran onto the base of the flower and make a loop out of it. Then attach a bezel, pin or hair clip to the loop.

Flowers made from foamiran can be a good base for making topiary. When the tree of happiness is decorated with flowers made from this material, it looks beautiful and graceful, creating coziness in the home. To make a topiary, you will need foamiran flowers, a flower pot, a tree trunk and a foam ball.

Foamiran flowers: lessons for beginners

There are many options for making flowers using artificial materials. Foamiran is widely used for making flowers. Due to the fact that this material is quite soft and pliable, it is quite possible for foamiran to be given absolutely any shape. A peony made of this material looks quite interesting.

To create it, you initially need to prepare materials and tools:

  • Foamiran pink and green;
  • Glue gun;
  • Corrugated paper;
  • Iron;
  • Scissors;
  • Toothpicks;
  • Dye;
  • Wire.

Initially, you need to cut out blanks for petals and leaves. Wrap each petal in corrugated paper and attach to a hot iron so that the petals acquire texture. After that, the petal, wrapped in paper, must be folded like an accordion and twisted. The leaves also need to be heated and twisted to give them a realistic look. When all the petals and leaves are prepared, you need to make the core of the flower using foil.

The prepared foil ball must be pasted over with foamiran, and then the petals and leaves must be glued to it.

Important! Work must be done very carefully, as you can get burns when working with a hot iron.

Beautiful foamiran for beginners: a step-by-step master class

Lessons on creating crafts from foamiran can be very different, in particular, this material can be used for making dolls.

To make dolls you need to take:

  • Foamiran;
  • Foam ball;
  • Glue gun;
  • Thick fabric;
  • Iron;
  • Accessories.

To make a doll's head, you need to warm up the foamiran and wrap it with a foam ball. Then cut out a circle for the hair, warm it up and fix it on the head with glue. You can complement your hairstyle by attaching bows and curls. Draw the doll's face. To make the doll's body, you can use a foam blank of the appropriate shape. For arms and legs, take thick foamiran. Cut clothes for the doll out of dense fabric and make shoes. Then you need to assemble the doll by gluing its individual parts.

Foamiran master class for beginners (video)

Crafts from foamiran can be quite interesting and unusual, the most important thing is to be creative in their creation.

Welcome to the world of floristry!
Today there will be a continuation of the theme of flowers from foamiran.
Last time we made beautiful roses from this material, I recommend not to miss these.

And now I will tell and show you how I did different types flowers from Thomas.
You can use such decorations for different purposes, for example: to decorate the interior in an apartment. You can make a whole bouquet in a vase, in a basket, in a pot or in a hat box, awesomely beautiful compositions are suitable for topiary or curtain rods.

Another popular purpose for such flowers is to decorate a dress or hair; usually such floristry is attached to elastic bands, hairpins, headbands, headbands or brooches.

I make flowers for photos - paraphernalia and bouquets, so I will have them on the stem, you can do without a stem and attach to any other base.

I want to start this series of master classes with my beloved Pansies or Viola, as they are also called. These colors have a rich palette of different colors. Today I will show two of them, blue - blue, and lilac, but you can choose any other to your taste.

Patterns of petals, sepals and leaves for pansies.

You can translate and cut from the monitor screen. You can circle the pattern on the foma with an awl, toothpick or needle.

You can choose tinting for flowers to your taste. I used yellow, lilac and purple oil pastels.

I make veins on the petals with an awl and tint the bottom in a light yellow color.

And the top is lilac, shading with a sponge.

For a deeper color, I add purple strokes and blend it.

The top 2 are lighter, and the middle 2 and the bottom 1 are darker.

Violas are also characterized by dark veins in the core of the flower. They are best done with acrylic paints, but mine unfortunately dried up and had to use pastels, although it didn't work out as I wanted.

Now let's move on to the assembly. At the end of the wire, we make a small loop, and glue a piece of Thomas, very small, you need to wrap it somewhere at a time, and then manually cut off the remaining end.

So that this transition is not so visible, we melt it a little on the iron and level it.

We tint this stamen yellow and glue our first lower petal.

The last two should be behind the averages.

You will need two more sepals, which I will tint with a darker green.

I heat up the iron and twist them a little.

To put it on the stem, I make a hole in the middle of the sepal.

I glue first with sharp tips.

Then with rounded ones.

With the help of round-nose pliers, I make a bend of the stem, like in natural flowers.
Although I do not pretend to be 100% similar.

Such is the pansy turned out.

I also decided to make it a different color, I will not dwell on all the points in detail, so I will briefly show some points.
For example toning this time is brighter and more saturated. I use bright yellow and dark blue.

The edges of the petals are made dark blue. I like this color option for real flowers too.

I make the edges of the petals in a wave stretching a little with my fingers. The assembly is exactly the same as in the first version.

How to make a dandelion step by step master class

In the next master class, I would like to show you how to make a sun dandelion, so beloved by everyone. Why is it painful, but because it is very difficult to get rid of it in the garden because it has very large and deep roots and it spreads at an incredible speed, flies from everywhere.
However, despite these shortcomings, it also has many advantages. Delicious jam is made from dandelions, wreaths are woven, which have already become a tradition with us, and how the eye rejoices at the sight of a dandelion meadow.
In addition, these sunny flowers appear among the first in the spring.

To make a dandelion, you need a strip of yellow foamiran 40 cm long and 2 cm wide.

To speed up the process a little, fold our strip in half and cut into small strips 1-2 mm wide and about 15 mm long.

We also cut out a circle about 5 cm in diameter and also make cuts along the edges.

Cut off 10 cm from our main strip.

We heat up the iron, I set the temperature slightly below average. We apply our strips in parts, remove and lightly scroll them with our fingers.

We do this with all the parts and with the sepal too.

Next, we wind a long segment, glue it, on the contrary, the stripes should look outward.

At the sepal I make a hole and veins in the middle.

When the sepal is glued, it turns out to be in the shape of a cup.

For the second part of the sepal, you will also need such a lot of the final star.

The dandelion tips can be twisted even more by heating.

We also twist the ends of the asterisk well.

And we glue it to our flower.

For more similarity, you can make more leaves. I tint them a little with dark green pastels.

And here it is, the sun is ready)

Do-it-yourself peony from foamiran

I also really wanted to make a beautiful peony to please me all year round. I really love these flowers, but they bloom not long enough. And now, regardless of the season, I will have a peony at home.

To make a peony, you will need 3 strips 50 cm long and 3 cm wide; 3.5 cm; and another 4.2 cm.

You will also need two five-leafed leaves.

We cut the long stripes into smaller ones to the full length, not reaching the edge of the strip 0.5 - 0.8 cm. The distance between them is from 0.1 to 0.5 cm. We cut in any shape so that everything is different.

I took the color of Thomas fuchsia and tinted the edges a little with white pastel, but this moment is optional, if desired.

We heat the iron at a temperature slightly below average, heat up our stripes and scroll them between our fingers, giving them a chaotic shape.

We also heat our five-leafed leaves, and twist each petal separately. Leave to cool.

To form a bud, we prepare a stem from a floral wire and a piece of foil, twisted into a ball.

We make small indentations in the middle of the petals in the five-leafed leaves, stretching the suede with our fingers.

We begin to make our peony from the smallest strip of 3 cm.Lubricate a small part with glue.

We begin to wind around the middle of the foil circle.

We wind round after round constantly lubricating with glue.

We wind the second behind the first strip, gradually going down a little lower.

We also wind the third one, going down to the very base of the stem, in some places folds will be obtained, but this is normal, all this will then be closed with a five-leafed leaf.

In the five-leafed leaf we make a hole in the middle and grease it with glue, glue first one, and then the second in a checkerboard pattern.

We also need leaves and sepals for the peony. I made these patterns.

I cut them out of foamiran and made veins on them.

I also tinted the leaves in my favorite way, which I described in more detail in the previous one.

For the leaves, you will also need small pieces of wire that need to be taped.

All petals are heat treated.

Glue the leaves to the wire, make a hole in the sepals for the stem.

We glue the rounded sepals first, and then the sharp ones.

Tape the tape with the tape to the main stem of the leaves.

Our peony is ready!

Now I will have beautiful flowers at home all year round)

Master class of ranunculus from foamiran

Another type of flower that I like and which comes in many varieties is ranunculus. There are a lot of options for its execution, I will share the one that seemed to me quite easy, but at the same time very interesting.

I wanted to experiment with the color of the flower, so I will mix several colors of oil pastels together to get an unusual color. This point is optional, but if you are interested, you can also try to repeat it, or just skip this step.

For the experiment you will need: One part blue; 3 parts of red and 3 parts of black, but after this experience I realized that it was better to take two parts of black. I just originally wanted to get a slightly different color, but in principle, this option turned out to be also very interesting and unusual. How to get the desired palette can be found on this site Trycolors.com, I liked the site, although the recommended tone did not match. Perhaps it also depends on the materials that are mixed.
You will need a piece of foil or baking paper to heat it. Iron over medium temperature.

When the pastels are concealing we mix the colors with each other.

When you remove the foil from the iron, the pastel hardens again.

I used the template of the petals like this, only the middle between the petals I cut deeper. It took me 6 cents for 1 flower.

I tried to tint the petals with liquid pastel when it was heated and solid when it was already frozen. The effect is slightly different. Melted pastels tint with a thicker and darker layer, and hard ones, on the contrary, with a lighter and lighter layer.

In order for the pastel to be liquid again, it must be heated again; you can use a sponge for toning.

Foamiran is the latest eco-friendly material, it is pleasant to make various crafts from it. Foamiran has a number of properties - it is not only pleasant to the touch, but is easily cut with scissors, easily stained, changes shape when heated, is not hygroscopic, environmentally friendly and does not emit odors.

It is not necessary to make flowers and dolls from foamiran, you can make various bows.

This will require:

  • Foamiran of the selected color (pink, lilac);
  • Scissors;
  • Super glue;
  • Curly buttons.

From foamiran we cut 3 strips about 2 cm wide, 13 cm long.One strip is cut out 1 cm wide, 14 cm long.

Glue the 3 cut strips with rings. After the glue has frozen, take 2 blanks and glue them together in the middle. Glue the third blank on top of the two glued ones. After that, we wrap them in the middle with a thin cut out strip, and in the middle we fasten a curly button. The bow is ready.

It can be used as a decoration on a hair clip, children's shoes, as a brooch on children's clothes or in a decor for curtain clips.

The main advantage is hand-made production.

We make crafts from foamiran with our own hands at home

Foamiran can be used to make a distinction between brooches, topiary, flowers, butterflies, dragonflies, bows, voluminous applications, winter pictures, dolls and puzzles for children, which can be made not only from terry felt.

Such novelties can be done:

  • Mother's Day;
  • By the New Year;
  • On Christmas;
  • Birthday, Easter;
  • On the day of St. Nicholas.

The most different, interesting and simple crafts can be done with your own hands from material such as foamiran. There are various step-by-step instructions, diagrams and patterns for foamiran crafts, both for beginners and for craftsmen in this business.

It will be interesting not only for girls to make crafts from foamiran, but also for boys, for example, to make a 3D model of a car or a robot.

You can watch lessons on making crafts from foamiran, or you can learn it yourself, you just need to connect your imagination and patience.

How to make flowers in crafts from foamiran

For those who have just started doing crafts from foamiran, making chamomile with their own hands is suitable.

For this you will need:

  • Dry pastel;
  • Toothpicks;
  • Trape tape;
  • Super glue;
  • Wet wipes and iron;
  • Wire.

First you need to make templates out of cardboard for future daisies, and shiny-looking paper will do. Circles of 5-6 cm and 7-8 cm serve as a template. Then we apply it to the white foamiran and cut it out, however, it is necessary to cut it in waves. Waves or curves can be made with special scissors (curly), but you can also use simple manicure scissors. After that, we cut each wave to the base, leaving about 1 cm untouched to the center. When the blanks for chamomile were cut out, they must be toned. To do this, you will need a damp cloth, rolled on your finger or folded in half, wiped in a pale green color. With this color we will decorate the middle of the chamomile.

To make the petals realistic, you need to iron the blanks with an iron. The petals from this bend towards the middle.

The next step is to cut a strip 2 cm long from yellow foamiran. We make a fringe on the strip. Then we twist them and glue them to the wire (chamomile stem). After the glue has frozen, it is necessary to attach the resulting blanks to the iron or hold them over a lighter so that the fringe opens. After we have made the blanks for the flower itself, we cut out the leaves from the green foamiran. It is necessary to cut leaves 5 cm long, long and round with a diameter of about 4 cm. We also cut the fringe and apply it to the iron or lighter so that the edges of the sheets are bent.

The last step is the connection of all manufactured workpieces. For this, a white blank made of foamiran, which is painted in the middle in a pale green color, is strung on a wire and glued to a yellow bud with a fringe. Next, we string a green rounded leaf, and also glue it to the white blank. Glue the leaves on the stem of the chamomile, and wrap it with a green trape tape. And now the chamomile is ready! But, for a bouquet, you will need 10 such do-it-yourself daisies.

Crafts from foamiran do it yourself: master class

Foamiran can be used to make funny butterflies and dragonflies.

This will require:

  • Foamiran of different colors;
  • The wire is thin and thick;
  • Glue;
  • Acrylic paint;
  • Toothpick;
  • Sequins.

From foamiran we cut strips with dimensions of 1 cm by 10 cm (3 strips), 1 cm by 16 cm (1 strip), 1 cm by 21 cm (2 strips), 1 cm by 15 cm (2 strips).

We screw in and glue the smaller strips first, then the larger ones, inserting them one into the other. We twist 3 strips with dimensions of 1 cm by 10 cm and one with dimensions of 1 cm by 16 cm with a tube and glue them together - this is the body of a dragonfly. We glue the wings on the sides of the body of the dragonfly. We make a dragonfly antennae from a thin wire, and glue them to the dragonfly's head (you can simply insert it). Beads or beads can be attached to the ends of the antennae. We put the dragonfly on a thick wire, pre-piercing it with a toothpick. We paint the body with acrylic paint.

You can apply a little glue and sprinkle with glitter.

Here's a dragonfly turned out.

Necessary material for crafts from foamiran: dimensions and characteristics

Foamiran is a velvety, soft material and is sold in sheets with dimensions of 50x50 cm, 50x60 cm, 50x70 cm. The thickness of foamiran is from 0.5 mm to several centimeters. Today foamiran has more than 40 shades and shades are constantly replenished. There are Chinese, Turkish, Iranian, Korean foamiran.

They all differ in size and thickness:

  1. Iranian foamiran has dimensions of 60x70 cm, or 60x90 cm.Its thickness is from 0.8 mm to 1 mm. Very light, velvety to the touch. But, when making crafts, it stretches and holds its shape worse; with intense stretching, foamiran can break.
  2. The Chinese foamiran has dimensions of 50x50 cm. The thickness of the Chinese foamiran is from 0.5 mm to 1 mm. To the touch, the Chinese foamiran may not be porous at all, smooth, but it may be velvety. Also, Chinese foamiran can be plastic and easy to process, or it can be very sensitive, so that, when ironed, it can shrink and deteriorate.
  3. Turkish foamiran has dimensions of 60x70 cm, its thickness is 1 mm. Turkish foamiran has less than 30 shades. Turkish foamiran is the same as Iranian, pleasant to the touch, velvety, easy to process.
  4. Korean foamiran has dimensions of 60x40 cm, with a sheet thickness of 1 mm. Korean foamiran is very pleasant to the touch, it is so velvety that it resembles a plush. It stretches a lot and is difficult to break during handling. Also, Korean foamiran can be 0.6 mm and 0.8 mm thick, which are not inferior in quality to foamiran with a thickness of 1 mm. Korean foamiran is very colorful and has quite bright and juicy shades in its palette.

Whatever country produces such material as foamiran, each will have its pros and cons.

For one, Iranian foamiran will be the best, for another Chinese, that is, for personal taste.

Many people think about how to glue foamiran, because simple PVA glue will not work. Foamiran crate should be applied with a glue gun, super moment or on double-sided tape.

We create crafts from foamiran for children and loved ones

Volumetric applications are well suited for children. All components of the applique can be cut out by yourself, but the child must assemble and glue. It will be safer for a small child this way. However, if the child is already attending school, then you can cut it together.

For a volumetric application in the form of grapes, you will need:

  • Light and dark green foamiran;
  • Foamiran brown;
  • Several shades of pink foamiran;
  • Purple foamiran;
  • Scissors;
  • Iron;
  • Double-sided tape;
  • Toothpick.

For the pattern, you will need a pear-shaped base (1 piece), a strip with a length of 25 cm and a width of 0.5 cm, 4 curly leaves, two of which are smaller, a piece of a branch cut from brown foamiran, 25 pieces of circles of different diameter. Cut out circles of different diameters from pink and purple foamiran.

On a pear-shaped base on double-sided tape, glue the circles in a checkerboard pattern.

We process the cut sheets (4 pcs.) With an iron to give a slight waviness. Scratch the veins in the middle of the sheets with a toothpick. Glue 2 large leaves on the background of the base, and glue 2 smaller leaves on the cap of grapes. On the very top of the head we glue a brown branch cut from foamiran. We make a vine from the strip, by pulling it out with scissors, and gluing it to the side of the sheet. Such a branch of grapes can serve as a decor in a house on New Year, it can be placed in a frame and hung on the wall or glued to a magnet to hang it on the refrigerator.

Crafts from foamiran (video)

Crafts from foamiran are beautiful, light, soft, colored, which can be given to children to play, and it will be safe. Such crafts are not only harmless, but they can be bathed and washed from various contaminants. So, foamiran is the most perfect material for crafts.

How often can you see beautiful artificial flowers that decorate various holidays and celebrations. Artificial jewelry is used for interior decoration, and they are also often used as costume jewelry. The creation of flowers from foamiran is a whole direction in needlework. It is no coincidence that it has become so popular: this process is very exciting, and sometimes ready-made flowers cannot be distinguished from real ones. Foamiran is often compared to plastic rubber. In this article, we will look at what foamiran is and offer options for entertaining master classes.

Foamiran appeared on the market of materials for creativity and needlework for a long time. Its name is consonant with the name of the manufacturer - "Foamlran"; it is supplied to Russia more often from Iran. The material gained popularity due to its unique properties: with light heating, foamiran can be given absolutely any shape. Moreover, it is environmentally friendly. Also, the material is rich in color palette. All these characteristics have made it so popular for creating flowers, jewelry and toys. He rightfully earned the love of many needlewomen. Foamiran can be bought at art and craft stores. A large assortment is offered by online stores at rather attractive prices, in addition, they deliver goods to any region. The needlewomen, who at least once created jewelry from foamiran, know how easy and pleasant it is to work with it. The material is malleable, the products are bright and neat. In order for even novice craftswomen to create charming flowers, we have made a selection of master classes. For clarity, step by step instructions with a photo.

Types of foamiran

Zephyr Silk Glitter Foamiran with flock Foamiran with pattern Perforated Foamiran with glue base Textured Decorative Embossed Velvet

Gorgeous rose

You will need: foamiran red and green, ruler, scissors, glue gun, iron, second glue, foil, green and black pastels, tweezers, lighter, floral wire, tape tape, plastic mold sheet, stationery knife.

Master Class

  1. Cut 25 red foamiran rectangles, 3 x 4 cm.
  2. Fold the rectangle in half and cut the corners. Repeat this process with all the blanks.

  3. Heat the petal by holding for 5 seconds near the iron, then stretch it in all directions so that the foamiran is thinned and twist the edge of the petal outward. Make a fold, pinch with tweezers and fix with a lighter. Repeat this process with all the blanks, forming the petals.

  4. Prepare a 10x15 cm rectangle of foil.
  5. Shape the foil into an oval shape and glue it onto the end of the floral wire.
  6. Apply glue to the bottom of the petal and wrap around the foil.

  7. Glue the petals to form a rose.
  8. Wrap the tape with tape and glue at the beginning and end of the stem.
  9. Cut 3 green foamiran leaves.

  10. Cut a 7 x 7 cm square of green foamiran.
  11. Fold the square in half 2 times.
  12. Shape into a leaf at the edges where there are no folds, then unfold the sepal.

  13. Make small shavings with a stationery knife from black and green pastels, mix them and darken the edges of the sepal with a sponge.
  14. Heat the leaves and press them against the mold.
  15. Heat and knead the sepal for a realistic look.

  16. Glue the sepal to the base of the bud.
  17. Glue the leaves.

A gorgeous foamiran rose is ready!

Exquisite peony

You will need: light pink, dark pink and green foamiran, scissors, tape tape, yellow, green and pink acrylic paints, thick and thin floral wire, glue gun, thread, brushes, foam sponge, foil.

Master Class

  1. Consider carefully the pattern of flower details presented below.

  2. Prepare the foamiran and cut out the blanks according to the pattern: A - 10 light pink petals; B - 10 light pink and 5 dark pink petals; C - 10 light pink petals; D - 5 dark pink petals; E - 5 dark pink petals; З - 3 green leaves; M - 6 green leaves; K and L - 5 green sepals each; F - 1 light pink blank in the form of a sun.

  3. Tint the petals with pink paint.
  4. Draw the structure of the leaves using green paint.

  5. To give a realistic shape to the petals, take blanks A, B and C.
  6. Fold the petal into an accordion, twist and unfold. Repeat this process for all petals A, B, and C.

  7. Take petals D and E, then give each of them a concave shape. To do this, place your thumb in the center of the petal and stretch the foamiran around the edges.

  8. Fold the sheet in half, then accordion and unfold. The edges can be twisted. Give a realistic look to each leaf in the same way.

  9. Roll a circle of foil with a diameter of 1.5 - 2 cm.
  10. Punch a small hole in the balls, fill with hot glue and insert a thick wire as a stem.

  11. Put the sun-shaped blank on the stem and tie the rays with a thread.
  12. Paint the ends of the rays yellow to make the stamens.

  13. Glue 10 petals A with a glue gun. It is worth noting that you need to glue the petals in a circle, placing them in a checkerboard pattern.

  14. Glue the petals B, then C, D and E.
  15. Glue sepals L and K.

  16. Glue a thin wire to all the pieces of paper.
  17. Connect the leaves together and secure the tape with tape, making twigs.

  18. Glue the twigs to the stem.

Tulips

You will need: foamiran of bright colors, green foamiran, floral wire, dry pastel, wet wipes, tape tape, floral buds, glue, scissors, ruler, iron, cardboard, toothpick.

Master Class

  1. Draw a tulip petal 6 cm high and 3.5 cm wide at the center on the cardboard, then cut out the template.

  2. Draw on cardboard a sheet of tulip 25 cm long and 3.5 cm wide at the center, then cut out the template.
  3. Trace the petal template with a toothpick on the foamiran and cut out 6 petals.
  4. Trace the leaf template with a toothpick on the green foamiran and cut it out.
  5. Tint the petals and leaf of the future tulip using a damp cloth and dry pastels.

  6. Heat each petal by placing it on the iron, then shape them into a realistic shape by stretching them in width and length.
  7. Heat the tulip leaf and fold in half lengthwise.
  8. Glue 3 petals to the flower bud, covering it completely.

  9. Glue the other 3 petals in a checkerboard pattern.
  10. Glue a piece of floral wire into the sheet.
  11. Wrap tape around the stem and attach the sheet.
  12. Make a whole bunch of tulips in the same way.

Foamiran tulips are ready!

Creative flowers

You will need: textured foamiran of bright colors, glue stick, glue squares, cocktail tubes, figured hole punch (optional).

Master Class


Creative flowers from foamiran are ready! I recommend watching this video!

Chrysanthemum

You will need: glitter foamiran, scissors, glue gun, green soft wire.

Master Class


Foamiran orange chrysanthemum is ready!

Lily

Chamomile has long been considered a symbol of the family. Despite its simplicity, it is a very sunny and vibrant flower. It is no coincidence that they began to decorate weddings with daisies so often. To easily create a charming foamiran chamomile, we suggest using step by step master class and photo.

You will need:

  • white, yellow and green foamiran;
  • a sheet of cardboard;
  • protractor;
  • ruler;
  • pencil;
  • glue.
  • a thin stem stick or wire.
  • iron or candle.

Master Class


Foamiran chamomile is ready!

Tender rose

Rose is the queen of flowers. A flower beloved by many women can be made from foamiran, moreover, it will not fade and will delight the eye for a long time.

You will need:

  • green and pink foamiran;
  • scissors;
  • glue;
  • a piece of foil;
  • thick wire.

    With the help of foamiran, you can create the most different flowers Hydrangea with sunflower is also great. They are carried out approximately according to the same principle, the only difference is in the color of the foamiran. We suggest you create a sunflower using our recommendations.

    You will need:

    • foamiran (white or yellow, black, green);
    • thick paper;
    • paints (acrylic can be used);
    • floral green ribbon.
    • toothpick or wire.

    Master Class